News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - bapguy

#1
 It usually means dirty track , wheels or both. Could also be a bad connection to the decoder.
#2
HO / Re: Spectrum GE 45 ton switcher decoder
March 01, 2024, 06:58:34 PM
You'll need to remove the board installed from the factory. A Loksound 5 nano will have to be hard wired in. Loksound has a ge sound file, but it's for a 44 tonner. If you order, you have to have the file loaded into the decoder. Digitax has a N scale sdXn147ps. With this you need a pr3 or pr4 to down load a sound file. Digitrax has one for the  45tonner.
#3
HO / Re: HO S2 won't start on DC
February 27, 2024, 10:47:33 PM
According to Soundtraxx, 10 light blinks means the deocder is getting too much voltage. Get a meter and measure the voltage at the track. Should not exceed 20 volts. There is no reset button. What power pack are you using?
#4
HO / GE 44 tonner
November 30, 2023, 10:50:47 AM
 Hey Mr. Bach-man, any word on when the HO GE44 tonner with sound will be here?
#5
HO / Re: Southern pacific daylight 4449 new ones
September 28, 2023, 10:22:54 PM
 It looks like the cab roof comes off. Looks like a tab on each end holds it in place.
 https://www.bachmanntrains.com/home-usa/dwg/dwgs/H502X-IS001.PDF
#6
HO / Re: double crossovers
May 06, 2023, 09:44:19 PM
No.
#7
What brand DCC controller?
#8
 No. The chasis for the FT-A is wider then the other 2. The GP30 is a split frame and had a triangle shape at the end. The GP7/9 frame is atraight across at the end.    Joe
#9
HO / Re: Need DCC help
March 28, 2023, 09:31:46 PM
This is for a TCS hard wired decoder. It will work with any 8 wire decoder. https://drupal.tcsdcc.com/installation/ho-scale/1215                 Joe
#10
HO / Re: Mr DCC
February 27, 2023, 10:12:43 PM
Do you mean this guy? https://mrdccu.com/index.php/mrh-mag
#11
HO / Re: HO Scale SD-45 Pick up wires
February 19, 2023, 10:24:03 PM
On my Bachmann diesels, the wires are stranded. I noticed they broke easily from the trucks when I added sound decoders.   Joe
#12
I say no. The I/O port is for the discontinued walk around companion. The 44212 is a DC controller. Don't mix DC and DCC.
#13
HO / Re: HO SCALE SANTA FE 3500 LOCO DISASSEMBLE
January 28, 2023, 11:51:23 PM
You need to be more specific. Steam or diesel?Is 3500 a model number or road number?
 Go here for diagrams  https://estore.bachmanntrains.com/index.php?main_page=index&cPath=68
 
#14
HO / GE 44 tonner
January 25, 2023, 10:41:51 PM
Hey Bach Man, any idea when the sound value GE 44 tonner will be available?
#15
Just got an e mail from Soundtraxx about the diesel decoders. Only shows on their web site.    Joe