ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
September 27, 2021, 01:06:49 PM
Home Help Search Login Register
News: Check out the photo gallery link above or >click here< to see photos of recently announced products!
  Show Posts
Pages: [1]
1  Discussion Boards / HO / Newer FT trucks on: July 21, 2021, 09:48:29 PM
I am in search of the trucks that are on the FT diesels with the easy app version, such as model #68902. These trucks are different from the earlier versions in that the middle of the ends of the trucks have a recess in them on the upper half, so they are not blunt on the ends. I am making custom coupler mounts in order to install the coupler heads closer to the locomotive for a more realistic prototype spacing between the locomotives in my ABBA set. I had ordered what I needed from Ruth at Bachmann, and they were not right, so she sent another set and they were the same and not right, either. I was told thatís all that they have. The model number of what they sent is H615X-00A0-PR-B. The online catalog also shows another model number, but I was told that they are both the same.
Does anyone have any ideas for me?
2  Discussion Boards / HO / 2-6-6-2 sand dome removal on: September 26, 2020, 12:33:17 PM
I have the Spectrum USRA 2-6-6-2 and the motor is not working. I have put track power to the two pins of the plug and it wonít go. Will that even work, or do I need to be able to put track power through the tender pick up wheels and then on to the motor? I need to remove the boiler shell to test the motor. I see on the exploded view that the sand domes have to come off to get to the two screws. I have been using my spudgers to try to get under the sand domes to pop them off, but to no avail. I know better than to grab the sand domes with a pair of pliers. Can Anybody tell me how you do it?
Pages: [1]
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!