Yes sir.
Let's hope they get it fixed for us.
Fingers crossed!

Sure.
Here's how it's supposed to work:
On the bottom of the reply box,left hand side ,there is a little blue arrow that points down.
Next to it there is text That says "Attachments and other options".
Click on the blue arrow.
Look for the box that says "Drag add drop your files here,or use the button to add files."
Click "Add Files".
A box will automatically open on your screen. It will show a file on your computer.
Generally it's one that you've been using mostly recently to store photos,documents,etc.
If it's the wrong file,on a Windows PC,or laptop,you'll click on the drive you keep your photos on.
For a lot of users,it's usually drive C.
Click on the drive letter for the drive you need to open.
Everyone is different, so what I'm telling you may not apply to your device! My computer is a multi-drive device with 4 HD's and 11TB of storage.
The drive I store my photos on is designated as Drive D,which is a 2 terabyte drive.
So, on my machine,I would click on the icon for drive D.
When the drive opens, it shows all of the various files on drive D.
I select the file folder where the photo I'm looking for is ,scroll down to the photo and then click on it.
It will automatically upload to the website.
You can load multiple photos, or ,if you're done,you can click upload.
The photo should then complete uploading to the website.
And this is where the error message comes up.
It was fine. It worked . And now it will not.
Hopefully they'll fix this issue.
But if not, as has already been noted,is not like we haven't dealt with this issue for years.

They did change it .
I've uploaded several files on the G Scale forum with no problem.
The last photo I tried to upload to this site was only 69kb,well under the 350kb that this site allows.
I'm a computer expert,and I know the difference in file types and sizes!
Now, there's suddenly a problem,again, and I wish they'd fix it permanently.
Check out one of the posts that I uploaded photos to on the large scale side:
https://www.bachmanntrains.com/home-usa/board/index.php/topic,37994.0.html

No other train forum that I belong to does this.
The problem/issue is,in my experience, unique to this one.
I'm glad that mylargscale, and gscalecentral, don't have issues with uploading pics.
Mike

Hi, Mr . Bachmann.
I'm here to report an issue with uploading photos to this website.
When I try to upload an image, the website says "There was a problem during the uploading of... The upload directory is full. Please contact an administrator about this problem. "
Why is the website doing this?
Will it be fixed soon?
I'm trying to help a forum member with a DCC install on an On30 2-8-0,and I need him to be able upload some images of the decoder he has.
He thinks it is generic, but he's not certain what he has.
So, having a few photos of the decoder in question would be very helpful!
Many thanks for your time.
Mike.

Hi,Rjag.
Sorry I can't be 100% helpful with the install.
This is how I normally upload photos here on this forum:
Take a few photos of the DCC decoder.
Then (if you have a Windows PC or laptop),download the photos from your phone, or other device to your computer.
You'll have to downsize each image to less than 350KB.
To do that, you need to click on the Windows search bar at the bottom left of your screen.
You then type "paint" in the search bar.
When the computer shows the "Paint App",you'll click on that.
In paint, click File.
Then click Open.
Then select the file that you downloaded the photos to.
Click on the photo you want to modify.
At the top,left of the screen, you'll see Resize.
Click on Resize.
A box will pop up.
In that box, you'll see Horizontal, and vertical with boxes next to them.
Before you start, make sure that the Percentage circle is enabled.
After that, click your mouse cursor on the Horizontal box.
Using your number keys, enter the percentage you want for the horizontal.
If the image is a large file(over 1.5 MB),I enter 25.
The vertical will automatically match the figure that you entered in the horizontal box.
Click Okay.
Then click File.
Then Save As.
It is advisable to rename the resized image in order to preserve the original in case you've miss guessed, and made the file too small.
Don't worry.
By renaming the new file,you've preserved the original.
In short ,you can try again until you get the image file down under the 350kb maximum allowed by this website.
Do that with every image that you want to post here.
It's a bit of work, but it can be done without the need of a photo posting service.
Now, the fun part!
Right below the reply box,on the left hand side,you'll see a blue down arrow.
Next to it it says "Attachments and other options".
Click on the arrow.
Click on "Add Files"
A window will open on your screen.
If you have multiple hard drives, you'll first have to open the drive that contains the file where you put your photos.
Open the file, and then click on the file that you want to upload the this website.
If photo you selected is 350kb, or smaller, it will then automatically upload once you click it.
A yellow bar at the bottom will show how much room you still have available on that post for uploading photos.
If there are multiple photos that you want to upload, then you'll likely have to make several individual posts.
After you're done, just hit the "Post" button.
And you're done!
I know it's a lot of work, and another long winded explanation, but it's how I upload images on websites that have size limitations on the images that people upload to them.
Right now, I am unable to upload any images to this website.
"The upload directory is full. Please contact an administrator about this problem. "
So, I'm not sure how to get photos uploaded her at the moment until they fix this issue with the website.
Let me know if I can help you any further!
Mike

Hi,Terry.
No.
I disassembled the tender and had a look at the wiring this afternoon after seeing your post,but decided it would be too risky to try to trace them to where they go on the pin.
I would if I were replacing the entire motherboard/decoder setup.
But since the wires in the tender are tied in a knot,I decided it's too risky to try messing with it for fear of breaking connections (Bachmann solder joints are famously flimsy) and getting the wrong information to you.
So, I put it back together until I absolutely have to take it apart again.
Sorry buddy!

Hi.
I may be able to help.
But I first need to know what make and model sound decoder you're using.
And, of course, which of the many Bachmann On30 locomotives that you're working on.
I also need to know:
Is it factory (Soundtraxx)?
Or after market (TCS , Digitraxx,etc.)?
Is it going to be a sound decoder installation?
Or are you trying to simply reinstall the factory board?
Some pics would also be helpful.
If it's a factory decoder, and you are needing a wiring diagram, it will be extremely hard to figure out which wire goes where.
If you're dealing with broken plug wires, it may be very difficult to figure out the wiring.
The motherboard does have wiring call outs on it,but I've never seen a wiring diagram from Bachmann for one of these little locos.
The only thing they include in the box is a blown parts diagram.
But not wiring.
And most of my On30 locos were brand new, and factory sealed when I received them
To answer some of your questions:
A Keep Alive usually plugs directly into a Soundtraxx TSU-2200,or TSU-1100 decoder.
I'm not sure if any of the open slots on the factory board are labeled for one of those(I do know that TCS includes a built in Keep alive circuit in their complete decoder/motherboard kits such as their TCS DCC WSK-BAC-8 WOWKits  that I installed in my ET&WNC #12 4-6-0 a couple of years ago. It doesn't have any call outs for the rear heaglight. Bummer.).
The headlight has call outs on the board that are clearly labeled for it.
As far as most decoders(sound/non-sound) go,they can be joined to an 8 pin JST Plug.
Soundtraxx,TCS,Digitraxx,etc come with instructions to do this.(Soldering is required).
The decoder then can be plugged directly into the original motherboard in the tender.
The Keep Alive is then plugged into the back connection on the decoder,not the motherboard.
My DCC Mogul came with a 21 pin motherboard
And it included an adapter in the tender which allowed it to be converted from 21 pins to an 8 pin interface by using the method I described above.
There isn't a lot of space in the tender of a Bachmann On30 Mogul.
So,I opted to remove the adapter ,and place a TCS 1525 WOW 121 21 pin decoder in the tender.
This required a little modification(removing the screws holding the motherboard down in the tender,and then gently turning it around backwards so that the new decoder would fit!).That,plus a little electrical tape added for insulation.
Here's a link to the decoder I used(if you need a sound decoder for this installation):
https://www.ironplanethobbies.com/product/tcs-wowsound-wow121-steam-1525-21-pin-dcc-decoder/
I've installed decoders in 6 of my On30 locomotives which have ranged to a simple plug and play installation, to a full hard wiring job in a 2-4-4-2,and one of my 4-6-0's.
The latest one I did was the a fore mentioned installation on my 2-6-0 Mogul.
Initially, I didn't have the decoder seated quite right on the motherboard,which caused the headlight not to operate.
Honestly,I was feeling a little frustrated with this little 2-6-0 due to an unrelated issue with the guides on the steam chest.
So,I put it back in its' box,and posted about the issue on this forum.
Nobody had an answer,so I finally decided to look into the issue after a couple of weeks went by(I was by then deep into playing with my new Version 7 Big Hauler 4-6-0 with full DCC and it's Soundtraxx TSU-4400 sound decoder(it's pretty darn great! What with the sound ,and all.).
It took about 2 minutes for me to realize my mistake when I finally took the tender for the Mogul apart to look into repairing the issue.
The TCS 21 pin decoder was not quite all the way seated down on the motherboard.
There was a small gap between it and the motherboard.
I pulled the decoder off to check to make sure that the pins were all straight.
Took a moment to inspect all the wiring.
All was good there.
 I then carefully replaced the decoder on the motherboard, put it all back together,and then track tested it.
The head came on immediately!
So that was what the problem had been all along!
Funny how a slight misalignment like that caused such a problem!
Here's a link to the video of the now fully operational locomotive on my desktop test track :
https://www.youtube.com/watch?v=Opdtn--q7zk
Let me know if I can help!
Mike!

Ok.
Took a break from running my new Big Hauler Version #7 4-6-0 with DCC and  Soundtraxx TSU-4400 sound.
So, I finally decided to take an in-depth look at the mogul to see if I could figure out its' headlight issue.
Disassembled the tender and checked for a loose/broken wire.
All good.
Pulled the TCS 1525 21 pin sound decoder board to check for a possibly bent pin on the motherboard.
No problems there.
Had noted before pulling it that the decoder was not completely set all the way down on the pins.
Made sure that it was properly aligned and set on the motherboard after reinstall.
Removed all 4 wheel sets,cleaned all 8 wheels and lubricated the axles.
Reassembled tender.
Connected to locomotive and placed on tracks for testing with NCE Powercab.
Worked flawlessly, thusly answering my own question.
Mike
Thanks!

Hi. Good decision! It's trash.

Hey everyone!
I bought a Bachmann D&RGW #138 Mogul brand new on Ebay a few months ago.
It is the newer model with DCC.
So, for $100.00, it was a great deal.
The DCC board is a 21 pin model made by Soundtraxx.
Decided to put a sound decoder in it using the factory board.
I bought, and installed, a TCS 1525 Steam 121, 21 pin decoder in the tender.
Just like the Bachmann sound module, it is basically drop in.
Except for one thing:
You will have to turn the factory board around in the tender due to limited space.
After that, you're good to go.
And ,for those who don't know, the TCS decoder is far superior to the Bachmann sound module as it has far sounds and features at a price that is generally lower than the sound module is(if you can find one other than on the Bachmann website).
It's pretty fantastic!
I don't know what I've done , because the headlight no longer comes on.
I'm not certain what might be going on as I've checked out the wires in the tender,and they all look good.
I installed a TCS sound decoder just like this one in my 2-6-6-2, and it works flawlessly.
I'm thinking that I might have loosened a wire somewhere,but I don't see anything.
Any ideas what might be different with this one?
Thanks!

Will do!
Thank you !

Hi. That's very kind of you.
I'll probably take you up on that offer if I don't hear from the seller by Sunday evening.
Are you sure you don't need it?
They're very hard to come by.
And I don't want to leave you short should you need it.
I'll PM you by 6PM on Sunday if I haven't heard from the seller by then.
Can I send you any money for it? Or at least pay for the postage?
Let me know .
I highly appreciate this!

Tender coupler pocket.
You have to remove the rear truck, and then a cover that is held in place by  small screws.

More Photos!

Let me be the first to introduce you to the new Bachmann Big Hauler tender coupler(?).
I hope this will clear up any confusion about this item.
The shaft is metal while the coupler itself is plastic.
The coupler is removable from the shaft by removing the screw and popping the coupler off the end of the shaft.
I have never seen a coupler like this one in over 20+ years of running G Scale trains.
I believe that this coupler is unique to this locomotive and tender.
Not even Kadee makes a direct replacement for it.
At least not yet.