News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - Ralph S

#61
How quaint!
This is how I provide support to my EZ command controllers (Model 44901), changing my locomotives addresses and/or CV settings.  I do not have the Command Plus (Model 44933).
I use a separate track (EZ track) connected to one of my sidelines separated by isolators with a switch to connect (energize) that sideline when I'm not programming.  When I program I use the Broadway CV setter and/or the address setter.  Having these to modules I do not need to have a computer to make changes to my locomotives. (Click below to see these models)

Address Changer (Model 1020)

CV Setter (Model 1148)

Sometime in the future, I'm going to put the programming track inside my locomotive maintenance shed where I can use the Bachmann EZ riders (42901) to program and/or change my locomotives addresses or CV settings.  And of course, have wiring to that track connecting the two Broadway modules.
#62
General Discussion / Re: EZ Command Operation
May 01, 2025, 02:31:44 PM
From my experience this is the best resource for Bachmann Controllers.  Just understand that a lot of the responders on this site may have moved on to the more professional DCC controllers, and Bachmann may or may not respond to queries regarding any questions.  For that you would need to go directly to their parts/repair dept.

As for me, I've learned an enormous amount of information on this site and I still have and use Bachmann DCC, DC controllers and their support components.     
#63
This is an interesting case for another topic that was responded to:

Please check out this topic:
 
EZ Command Controller Stopped Working (https://www.bachmanntrains.com/home-usa/board/index.php/topic,39168.0.html)
Started by atansley, October 13, 2024, 07:23:41 AM

First perform the previous (first reply) to insure that it isn't something caused by dirty components.

Then please report back as to what you discover.
#64
This is an interesting issue.  But first, it requires what model of Bachmann's DCC controller is mentioned in this topic.

From what I've heard about, the Bachmann (model 44933) which is the Command Plus model, this may be an issue.  This controller is known to have an infinity type knob (resistor) model.  In that, you have to rotate the knob several times before the resistor/resistance provides the power to the circuit to power the locomotives.   Understand, I do not have this model controller (i.e., power supply) (at least not yet).   

My DCC Bachmann controllers (model 44901) uses the variable resistor which has a stop point at the stop and full throttle position. 

After reading the responses here, I believe that those infinity resistor type knobs are having issues with its position with regards to applying power to the track.
I have a Dodge Van with its radio knob that has that same type of infinity knob.  I have to turn that knob so many times before I can turn up or turn down the volume of that radio.  The radio still works but it is an annoyance having to rotate that knob so many times.

I fear that the newer Bachmann controllers (Command Plus) are experiencing that same issue.

Again, if the controller knob can continuously turn without a stop point, it's an infinity knob.
If you ask how to fix it!  Well, I'm still contemplating that.
#65
General Discussion / Re: 2 DCC controllers
May 01, 2025, 12:55:10 PM
Sorry I'm late to the topic again.  As for your inquiry of using two Bachmann DCC controllers to operate on the same track but for two separate locomotives, I have to inform you that Len and Jward (prior responses) are totally correct.

Mr Ward provided some information as to how you could do what you are asking.  My layout has this ability.  Below is what you would need without moving to the more professional controllers, if you're like me (an intermediate modeler with no desire to be professional) .

Below is what you need to perform the actions that you request without moving to the more professional DCC controllers.  Bachmann made three items to do this.





1) the Bachmann controller (44901) (see middle image made in light grey)

2) the Bachmann walk-around controller (44907) (see top image made in dark grey)
Unfortunately, Bachmann discontinued this fantastic dummy controller.  Why it was discontinued, is open for debate.   I blame Bachmann's sales analysis which I believe was miscalculated by a large margin.

3) the Bachmann walk-around connector panel (44908) (front face shown bottom image)

The DCC controller attaches to the walkaround via the I/O port that connects to the connector panel. From there, the walkaround connects to the other I/O port on the connecter panel.

Something to note:  If you have Bachmann's latest version of the DCC controller (called Bachmann DCC Plus model 44933) I believe it does not have the interface capability to support the walkaround)   

Again, Bachmann has stopped producing these controllers and finding the walkaround will be a task in itself.  The older DCC controllers (ones I have) and the connecter panel still seem to be available.

Hope this helps.

#66
I've been looking for a MOW vehicle and found the Bachmann truck with crane (model 16902) but it doesn't show in their catalogue.  (click on image to enlarge)

Can anyone inform me whether it has been discontinued or just out of stock?

Just to make this request clear, the Bachmann parts page shows that this item can be pieced together.  I am assuming that Bachmann still has available parts for this truck.   What I was looking for is one that is totally built, for purchase.  see this Bachmann page for the parts:
  https://estore.bachmanntrains.com/index.php?main_page=index&cPath=68_695_696
#67
General Discussion / Re: Reversable trains
September 29, 2024, 10:37:59 PM
Terry,
QuoteWhat do I mean about splitting the set?
If you click on the: " Had anyone tried splitting the Reversing Trolley Car Set?  I asked the question and explained it in a diagram.   Basically what I was referring to was placing a turnout in the reversing track (splitting, as I call it).  In this way the trolley (or loco for me) would travel down one of two paths then reverse itself at either end.  It would then return to the original starting point and reverse again.  Should the turnout be switched the loco or trolley would follow that path to the end and reverse itself and return to its original starting point.   

It sounds feasible to me.  What say you?

Or click on this below:
Had anyone tried splitting the Reversing Trolley Car Set
#68
General Discussion / Re: Chemical Plant Industrial Layout
September 26, 2024, 01:52:34 AM
Does your experience from this layout..., was there a helium production plant in the area?  I am trying to figure out how to make/build a helium plant on my layout.  I have several helium tank cars but no helium plant for them.  Goggle doesn't do justice on what a helium plant looks like.
#69
General Discussion / Re: Reversable trains
September 26, 2024, 01:24:07 AM

Interesting thing that was not mentioned.  Bachmann has a point to point reversing track set.  It's model number is 44547.   Beware models 44847 and 44547 one is "N" scale and the latter is "HO" scale.  It's a bit pricey for me at this point in time, but I am still thinking about getting this reversing system.  I already have a few of the reversing track from an earlier purchase in trying to obtain other items.

I also asked earlier in this forum about: Had anyone tried splitting the Reversing Trolley Car Set?  Unfortunately, I got no responses for that query.   ...But I'm still thinking about it for my HO museum track engines.

Sorry got off the subject.  From my research,
1.  I have not determined if the track system works with DCC.  I believe it is made for DC (analog).
2.  Any engine (locomotive or trolley DC powered) will work.
3.  It's the track and its autoreversing controller required to make it work.
4. See page 146 in the Bachmann 2024 catalog for this reversing system.

Hope this helps.
#70
General Discussion / Re: 4014
September 22, 2024, 12:30:57 AM
Let me know when the DD40AX is run (if any are still around and working).   That engine to me is a much better-looking double engine locomotive.  The stationary one that I use to work around had a 16 cylinder and a 20-cylinder diesel with a 4160KV (1500KW) generator sandwiched between the two diesels.  From what I was told just before this diesel was retired, was that it was a replica of the DD40AX.
#71
General Discussion / Re: Railroading 80 years ago
September 08, 2024, 03:25:34 PM
The pandemic found the error in senior managements enthusiasm for "Just in Time" shipping.  The companies including the railroad industry reduced inventory and, in some cases, reduced jobs, to support this new management cost control.  The pandemic found this management oversight and as stated wreaked havoc on shipping industry.  Some industries are sticking to this "just in time" management style.

Fortunately, my model railroad will not fall prey to this management style since I own the railroad, the rails, the modular containers, the trucks,
You cannot view this attachment.
and the construction companies.  I have a seat on the city, town, farm, suburb, industrial park council.  I have jurisdiction and authority of the railroad, city planning, structural engineering, water reclamation, subway, and any future planning.
                                                                                                 
#72
General Discussion / Re: Railroading 80 years ago
September 01, 2024, 10:55:42 AM
QuoteConsidering what a mighty Empire America's railroad system was at the end of World War II, it didn't take long for it to nearly collapse.  For those like me that went through it, it was a time of unbelievable melancholy to see our railroads Quickly going down the drain.
To me, although many a track and railroad company(s) have gone into history.  From what I see, the railroad industry is still the most powerful economy moving industry that keeps America in the forefront of technology and commerce.   As a matter of opinion, once the diesel engine was applied to trucks the railroad industry modified its transport vehicles from box cars to modular containers.  Basically, what I believe is that the railroad is a mighty, maybe now slender backbone using diesels keeping America the best in the world.  My model layout hopefully will reflect that opinion.
#73
This is great news.  I purchased the Bachmann 42901, although kinda expensive, to try out.  I only have 1 sound locomotive and have no controller that can change many of the decoder's other parameters.  This I think will allow me to place these rollers inside my maintenance shed.   If the rollers tend to tip over or move around, I was thinking that I could solder one set of rollers to the track leaving the other to be adjustable for different lengths of engine trucks.   It'll take a week or so before these rollers show up...
#74
In my search for obtaining additional locomotives, I ran across the Bachmann model 42901  E-Z riders.  I wasn't sure what these are used for... so a search on this wonderful forum found these two queries:
---Display/Test Stand Rollers - E-Z Riders(TM)  and ---HO test track rollers?

What I did not find is:  Can these test rollers be used to program DCC locomotives?  Would there be any drawbacks from programming on the test rollers?

The reason is, I could eliminate my program track (3 sections of 9-inch straight track) and just use the test stand to program the DCC locomotives.  I'm also thinking that I could put the test stand rollers inside my locomotive shed and program the locomotives in the shed.  This would free up space for other items on the layout.

Interested in all responses Pro and Con.

P.S. Terry your image clarifying the E-Z rider is superb!
#75
General Discussion / Re: Railroading 80 years ago
August 25, 2024, 04:28:09 PM
I also have to state the same...I wasn't born that far back.  The only Steam trains I've seen/ridin on were at Stone Mountain (Georgia) and at Disneyland (California).  It's great to reminisce about those days.  Good to put it in history for others to see and experience as I did at the Kenefick Park, Nebraska, just this past July (2024).
Excerpt here: https://www.youtube.com/watch?v=ZlbBvFqys8E and that history is as follows; https://www.youtube.com/watch?v=Mg6nnYkq9R0

My stop was to view the DD40X not the Big Boy.  It was great to see these two massive engines together.  I grew up diesel, hopefully that will not offend you.  Just to note, for those steam historians check out this forum topic: "UP's Big Boy is back on the rails!"  Just note that that second U-tube video lets you know that steam engines will not be forgotten.

P.S. not responsible for the content of these u-tube videos