will there be or is there a motion/ sound decoder that can be fitted into the older 0-4-2 porter?
i bought one before i saw there was to be a sound one comming out.

hi all,
i just bought a new 2 truck shay.( well the catalog offer says 2007)
when i opened the package the front truck driveshaft was disconnected.
i took the truck off and reinserted the shaft, no matter how i align the shaft the truck binds when the shaft collapses and it will not pivot all the way compared to fully extended.
it turns sharper to the left than the to the right.
it sticks like it is bottoming out. i hope this makes sense.
the rear truck pivots fine both ways.
thanks, Willis.

hi Stan,
do you have a picture of the decoder and connections?
thanks, willis.

thanks all,  just an idea that's bouncing around in my head .
willis.

thanks so much guy's.
i'll check them all out.
willis.

hi all,
just wondering, has anyone used On3o in a garden RR?
i have seen where O has been used, not common but has been done.
thanks, willis.

Dave,
thanks, i will check them out.
willis.

thanks Joe;
i was googling around yesterday and found that annual.
i was hoping to find a monthly or bi-monthly magazine for On3o, or another forum.
this forum is great but i  (like the robot said) need MORE INPUT.
willis.

hi all,
is there an On3o only magazine or site?
thanks, willis.

mf5117
check with www.trainbuildings.com, Michael Neibaum is a real nice guy to deal with.
he has jigs for any size trestle and cedar wood of any sizes needed.
he has building material also.
willis.

hi all ,    i guess old age eyes cannot tell that the 8s after the G in the part numbers are Bs .
after much back and forth, Irvin(sp) and i figured out what i wanted.
thanks Irvin, hope you can find the board.

i guess mr. jack L does not know what about it mr Bachmann, maybe you will answer

mr Jack, i fried the leds on the firebox flicker board on the 120.5 logging loco.
i contacted parts to order, 2 different pages that came with the loco on page #G828x-IS006 shows part#G811x#PCBO3a, the other page  G828x-IS007 shows part#G811x#PCB01.
the lady in parts is telling me that the pcbo3a is in the gearbox ass. and that the #PCBO1 which is the same # as the main board?  this is a pc board with 4 wires that plugs into the main board.
when you look up the main board, all it comes with is the main board and the PCBO4.
the lady was very nice, but trying to get her to understand what i was trying get across to her, and her not knowing why there is 2 part numbers for the same board on the 2 different pages.
to keep from loosing my cool, i just hung up and will try to get help here, HOPEFULLY.
thanks, willis.

that makes sense, thanks.
willis.

Mr Jack,
there is no weight above the post other than the boiler shell itself, just to be sure i put a piece of clay on the top of the post that was about 1/8 th inch thick and tightened the shell down it did not touch the clay at all.
i thank you for your help.
willis.