ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
December 11, 2019, 08:27:59 PM
Home Help Search Login Register
News: Please read the Forum Code of Conduct   >>Click Here <<
  Show Posts
Pages: 1 [2] 3 4
16  Discussion Boards / On30 / Re: Forney info on: November 18, 2013, 04:40:40 PM
Thanks Joe,I will file that away for future use.Layout is at least a month away from rail traffic.
17  Discussion Boards / On30 / Forney info on: November 18, 2013, 03:48:44 PM
I don't know if I'm just not looking in the right places or what but I can not seem to find a minimum radius for the Bachmann Forney.I'm not worried about mainline radius as we are using standard 4' NRAK modules,but we may have some tight curves on the branch lines.
18  Discussion Boards / N / Re: 4-4-0 drive shaft on: November 15, 2013, 11:25:17 AM
Have you checked with Bachmann parts? If they have them I would suggest buying several as they do seem to have a habit of getting lost.
19  Discussion Boards / N / Re: Is my new set faulty? on: November 15, 2013, 11:22:39 AM
Since you bought through Amazon it must be a new set.In would contact Bachmann first then return the loco for repair or replacement.
20  Discussion Boards / On30 / Re: The right loco on: November 15, 2013, 11:16:54 AM
To my way of thinking logging in Michigan means Shays.They were invented here and their main use was logging here at least in the LP.

I am however not familiad with logging in the UP so they may have used different locos.Even though I am a modern modeler I will admit to liking the geared locos.
21  Discussion Boards / On30 / Re: Banta Model Flat Car Kit on: November 13, 2013, 10:23:33 AM
Which flat car kit are you refering to? Huh?
22  Discussion Boards / HO / Re: Restoration of old IHC locomotive on: November 12, 2013, 10:59:31 PM
IHC's steam was mostly made by Mehano.Their diesels might have sucked but the steam was top notch.I bought a new Mikado because a friend bought a used one that ran so well it was a no brainer to buy the new one.

The only reason I no longer own it is that it kept falling off my N scale track after I switched scales. Shocked Grin
23  Discussion Boards / On30 / Re: Undecorated 2-6-0 kit ? on: November 02, 2013, 01:15:17 PM
I'll buy one to start if Bachmann does this. Grin
24  Discussion Boards / On30 / Re: 2-6-0 suggestion for Bachmann on: October 30, 2013, 06:48:12 AM
If you think On30 is dead or dieing I suggest you visit the On30 forum on Railroad line forums.I think you will be surprized at just how active this scale really is. Grin
25  Discussion Boards / On30 / Re: On30 message board? on: October 18, 2013, 11:41:20 AM
I also agree with Larry the RR Line On30 forum is a good place to dicuss On30.As for the On30 Conspiracy goes I gave up, on those idiots a couple years back.

Yahoo is definately a bad joke.
26  Discussion Boards / HO / Re: ho crossover using the ac accesory terminals on: October 18, 2013, 11:34:42 AM
Your powerpacks should have 4 connections 2 are for track power and are variable.The other 2 are a fixed voltage and are the AC or accessory terminals these are where you connect the turnouts.Using one pack for the track only and one for accessories is a good idea in my book unless you have a high output power pack.
27  Discussion Boards / HO / Re: How I nearly destroyed an engine on: October 18, 2013, 11:25:57 AM
I've had more than a few Athearns with bent frames some of them were brand new.You can straighten the frame with just your hands,you don't need to strip the unit any further than removing the shell to do this .To straighten the frame grasp the unit in one hand at the motor fuel tank and apply a downward pressure on the end just behind the coupler mount,Do this in stages so as to not over bend the frame.

It is really helpful if you can view the frame straight on at eye level setting on track.
28  Discussion Boards / HO / Re: 5 X 10 Layouts on: October 13, 2013, 02:43:12 PM
Have you looked at any 4'x8' track plans? They are quite adaptable will a little more track to fill you 5'x10' space.You could also expand on a smaller layout plan too.
29  Discussion Boards / HO / Re: code size and flex track on: October 10, 2013, 06:38:41 AM
Martha,you might try adding some weight to the caboose to see if that helps.I would recomend that you put it as close to the ends of the car as you can get it.I would also suggest that you add equal amounts a little at a time till you obtain your goal.One last tip check to make sure the trucks are not contacting the underframe or the caboose steps.
30  Discussion Boards / HO / Re: Tyco: one of Bachmann's oldest rivals on: September 29, 2013, 09:34:53 PM
LifeLike no longer makes model railroad items.Walthers bought out that division of the company at least 5 years ago.
Pages: 1 [2] 3 4
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!