ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
October 29, 2020, 12:57:49 PM
Home Help Search Login Register
News: Please read the Forum Code of Conduct   >>Click Here <<
  Show Posts
Pages: [1]
1  Discussion Boards / N / Re: N scale Bachmann Locomotives on: March 12, 2014, 11:46:45 AM
I want to say thanks for all the help and advice. I took the track apart and cleaned and made sure all the connections were connected and found that i had a short in the track from them not be connected right. Once again thanks to all of you for the help.
2  Discussion Boards / N / Re: N scale Bachmann Locomotives on: March 04, 2014, 05:04:38 PM
Ok I will add a second feeder to the layout and see if that works thanks.
3  Discussion Boards / N / Re: N scale Bachmann Locomotives on: March 04, 2014, 11:53:02 AM
I am using a Kato transformer, and yes they seem to stall out at the same spot on the track in a curve sections. I have cleaned the track. I think that the transformer may not support the locos since i have two tracks and it does the same with both. thanks
4  Discussion Boards / N / Re: N scale Bachmann Locomotives on: March 03, 2014, 09:59:32 AM
I cleaned the track, I dont run both dc and dcc at the same time only one at a time I have two tracks and run two power packs.  I run a bachmann F7A and B units dcc ready, a alco RS-3 DCC on board and a Baldwin 4-6-0 Dcc ready, My Kato locos are Ge44-9w and are dcc ready they have no problem running.
5  Discussion Boards / N / Re: N scale Bachmann Locomotives on: March 02, 2014, 07:25:59 PM
I run dc track and only one dc train at a time
6  Discussion Boards / N / Re: N scale Bachmann Locomotives on: March 02, 2014, 07:22:40 PM
The problem i am having is that when the locos run around the track they just stop loose power. I run one DCC and two dc locos. The all start out fine just when the get going the stall out.
7  Discussion Boards / N / N scale Bachmann Locomotives on: March 02, 2014, 02:03:51 PM
I am having trouble with my Bachmann N scale locomotives running on kato unitrack. I have Kato locomotives that run fine, what could be the reason for the bachmann not to run?
8  Discussion Boards / General Discussion / How to remove the shell on a EMD GP40 on: August 21, 2013, 01:48:15 PM
Can some help me out? I'm trying to take the shell of a EMD GP 40 locomotive to make it a dummy and need help?
9  Discussion Boards / N / passenger trains on: January 23, 2013, 09:41:31 PM
I'm looking to due a n scale passanger train layout, my question is what is the minimum curve radius i can use?
10  Discussion Boards / HO / HO parts on: January 22, 2013, 02:51:50 PM
When ordering a complete slope tender for 0-6-0 does it come blank or can you order it with decals?
11  Discussion Boards / General Discussion / Re: DCC for a 4-4-0 on: January 16, 2013, 11:30:00 AM
thanks which decoder did you use?
12  Discussion Boards / General Discussion / DCC for a 4-4-0 on: January 16, 2013, 10:05:32 AM
Can you put a decoder in a old time 4-4-0 loc.?
13  Discussion Boards / N / Ho scale couplers for a tender on: January 16, 2013, 09:55:55 AM
I am looking for a truck for a atsf tender.
Pages: [1]
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!