Welcome, Guest. Please login or register.
Did you miss your activation email?
July 07, 2020, 06:54:36 PM
Home Help Search Login Register
News: Please read the Forum Code of Conduct   >>Click Here <<
  Show Posts
Pages: [1]
1  Discussion Boards / Large / Weight of the 1:20.3 Scale 0-4-0 side tank porter (e.g., Item No. 82598) on: July 16, 2011, 01:30:09 PM
What is the weight of the 1:20.3 Scale 0-4-0 side tank porter loco?  I want to compare the weight to the new BAC91198 2-4-2 Steam Loco which I am told weighs 4lbs 2ozs.
2  Discussion Boards / Large / The new Baldwin 2-4-2 Steam Locomotive (Product Code 91198 or 91199) on: July 09, 2011, 03:50:22 PM
Questions about this new Locomotive.
1. What is its scale, i.e., 1:20.3 or 1:22.5?
2. What is its minimum turn radius?
3. Is this a Spectrum quality unit?
4. What is the height (in inches) of the engine cab door?
5. Is Item No. 91198 (Black with Red Windows and White Pinstripes) and Item No. 91199 (Green and Black with White Pinstripes) exactly the same? Pictures indicate that the pipe going down the outside of the water tank end at different locations???.
3  Discussion Boards / Large / Lubrication of the 0-4-0 Side Tank Porter Locomotive on: May 15, 2008, 10:14:24 PM
Is there any information available on Lubricating the G-Scale 0-4-0 Side Tank Porter Locomotive?
4  Discussion Boards / Large / Re: Greetings from a new 2-truck owner on: May 11, 2007, 02:51:26 PM

I had the same problem with the brackets that hold the Hose...  Bachmann was good about sending me a few replacement brackets (2 sizes...).
The part # are G811X-0ZD03 and G811X-0ZE04.  The hose is the black tubing and is used to get water from streams, etc. for the Shay boiler...

Good Luck.
PS:  It you want to convert the Shay to a coal fired unit, see the responses to my question dated March 9, 2007.
5  Discussion Boards / Large / Converting the G-scale 38-Ton Two-Truck from oil fired to coal fired. on: March 09, 2007, 03:28:26 PM
The #82199 G-scale 38-Ton Two-Truck came configured as an oil-fired unit (although parts to convert the tender to coal-fired came with the unit).

How do I remove the Tender from the Chassis so as to install the coal parts???  Do I have to remove the lamp and sand unit that is attached at the back of the tender??? 

Any help would be appreciated.
Pages: [1]
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!