News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

replacement motor blk for UB25 locomotive

Started by [email protected], February 08, 2019, 04:40:33 PM

Previous topic - Next topic

[email protected]

I need to know which wire to connect to which.  the connectors are different and the wire colors are also, when replacing a new Bachmann motor blk into an older aristo craft UB25.

Greg Elmassian

You will need to figure out which are track pickup and which are motor on both ends.

I hesitate to give you instructions, since wiring can vary over the years.

Some time with a multimeter, or a friend with electrical knowledge will be needed.

Sorry, no "perfect wiring" instructions are really available.

Greg
Visit my site: lots of tips and techniques: http://www.elmassian.com

Rluke

Have you taken the motor block apart (4 screws on top and two on the bottom)  to see where the wires go?
Also,  I was looking at the photos of the Bachmann motor block and see that they are not using the same kind of connector.   How did you resolve that issue?
thanks
Rich