News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Turntable

Started by dsg778899, November 09, 2009, 05:09:15 PM

Previous topic - Next topic

dsg778899

 I have a question about the new Tidmouth Sheds with manually operated turntable. Its product code 45236
I was wondering if it needed any special wiring to use it with DCC
I hope that someone can help me with this question or let me know where I can find more information on this.
Thanks

the Bach-man

Dear DSG,
I'll see what I can find out.
Thanks!
the Bach-man

Len

Depending on how the access tracks are wired, there's a potential for polarity reversal as the table rotates. So I would think some type of Auto Reverse Module, such as those used on reverse loops, would be needed between the table track and any feeder tracks.

Len
If at first you don't succeed, throw it in the spare parts box.

dsg778899

Quote from: Len on November 18, 2009, 03:21:04 PM
Depending on how the access tracks are wired, there's a potential for polarity reversal as the table rotates. So I would think some type of Auto Reverse Module, such as those used on reverse loops, would be needed between the table track and any feeder tracks.

Len


Thanks for the information Len. I have been waiting for a turntable that would fit with the EZ track system I was trying to find out if the turntable with need  any special wiring and if it does, will it show how to wire it and what parts it will need to do this