ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
September 22, 2018, 05:12:22 PM
Home Help Search Login Register
News: Please read the Forum Code of Conduct   >>Click Here <<
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  Large
| | |-+  2-6-6-2T logging g scale loco
« previous next »
Pages: [1] Print
Author Topic: 2-6-6-2T logging g scale loco  (Read 2172 times)
willis

View Profile
« on: March 11, 2010, 08:41:05 PM »

hi, i just bought this loco, i am installing or trying to put in a QSI G/O decoder.
the engine has 2 chuff optical sensors, the engine board has a 2 screw connector that says chuff input + and- the QSI board has chuff/cam out with 3 pin connector ground-1, cam-2, and +5-3. it shows make and break 1 and 2. how can that be done?
also the engine board has 2 speaker wires coming out of it to hook to the speaker but the QSI also has speaker out connector. (scratching my head on these 2 issues).
please help, someone, anyone!
thanks, willis.
Logged
willis

View Profile
« Reply #1 on: March 11, 2010, 09:34:55 PM »

sorry, can someone please move this to large scale, don't know how to do it
thanks, i don't want to have to re write the post allover again.
willis.
Logged
Jim Banner

Enjoying electric model railroading since 1950.


View Profile WWW
« Reply #2 on: March 11, 2010, 09:41:48 PM »

Easiest way to move your post is to copy and paste it into a new post on the large scale board.  Then come back and delete your topic from this board.

Jim
Logged

Growing older is mandatory but growing up is optional.
willis

View Profile
« Reply #3 on: March 11, 2010, 10:06:12 PM »

copy and paste?  don't know how.
willis
Logged
willis

View Profile
« Reply #4 on: March 12, 2010, 09:27:47 AM »

thanks narrow minded, i am 64 and just started using computer.
you said left button then release right button?
not being a smart ***, just don't know.
thanks, willis.
« Last Edit: March 12, 2010, 10:03:27 AM by Jack Lynch » Logged
willis

View Profile
« Reply #5 on: March 12, 2010, 10:38:03 AM »

thank you Mr. Lynch for moving this post for me.
willis.
Logged
Joe Satnik


View Profile WWW
« Reply #6 on: March 12, 2010, 10:48:16 AM »

NM,

Check your drag instructions, I think you meant "release the left mouse button".  (I'll delete this note later.)   

Dear All,

For highlighted text, I use these short cuts:

Ctrl-c to copy (to memory),

Ctrl-v to paste (from memory),

Delete to delete (highlighted text).

I am not used to using:

Ctrl-x to cut (to memory),  I guess it could come in handy.

Use the Ctrl key as you would the Shift key.

Hope this helps.

Sincerely,

Joe Satnik

Edit: grammar



« Last Edit: March 12, 2010, 10:49:58 AM by Joe Satnik » Logged

If your loco is too heavy to lift, you'd better be able to ride in, on or behind it.
willis

View Profile
« Reply #7 on: March 12, 2010, 01:53:17 PM »

thanks Joe and Narrow Minded,
i can mess things up even when told the correct way.
willis.
Logged
willis

View Profile
« Reply #8 on: March 12, 2010, 06:19:01 PM »

i got an answer to the speaker question, but still need help for the chuff problem.
anyone ? please help. Bachmann???
willis.
Logged
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!