News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Forney and 18 inch radius curves

Started by wally, May 16, 2007, 03:28:34 PM

Previous topic - Next topic

wally

Will the new Forney handle 18 inch radius curves? Thanks Wally

the Bach-man

Dear Wally,
It will, but not gracefully...
Have fun!
the Bach-man

terry2foot

Overhead view of On2 B&SR #6 (similar sized engine to the Bachmann Forney) on 18” radius track at;-

http://maineon2faq.fotopic.net/p24128367.html

Terry2foot

japasha

Wally,

The Forneys were used on  railroads that had very wide radius curves and very well maintained roadbed. While small in stature, they were never intended for very sharp radius curves. If you are going to do sharp curves, stick to an 0-4-0. These were made for consrtruction and very small industrial situations on temporary track. The Mogul is actually better suited to 18 inch radius.

John in Santa Cruz

   The Forney will do OK on 18" radius with a change of the rear coupler
to the longer shank (as found on the 0-4-2 Porter). This will allow the
rear of the Forney to swing out more without derailing whatever it is
pulling behind it.

-John