ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
July 09, 2020, 05:37:29 PM
Home Help Search Login Register
News: Check out the photo gallery link above or >click here< to see photos of recently announced products!
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  General Discussion
| | |-+  multi-level track
« previous next »
Pages: [1] Print
Author Topic: multi-level track  (Read 1454 times)
lfields

View Profile
« on: January 27, 2011, 03:47:18 PM »

My son got an E-Z track HO scale train set. How do we get the straight pieces to go up like a mountain or elevate to a bridge? Are there bent track pieces?
Logged
ACY


View Profile
« Reply #1 on: January 27, 2011, 04:34:05 PM »

No bent pieces, this is where it is best to adapt flex track for such uses.
Logged
jward


View Profile WWW
« Reply #2 on: January 27, 2011, 08:51:22 PM »

probably the easiest way to build elevated tracks are the woodland scenics risers and inclines. these are solid foam pieces that can be used on a solid tabletop with any brand of track. look in the photo gallery under "the bachmann builds a layout" to see how they are used.
Logged

Jeffery S Ward Sr
Pittsburgh, PA
mf5117

View Profile
« Reply #3 on: January 27, 2011, 09:35:28 PM »

I used the foam riser on my 4% grade ,going up to my second level . It's a bit much but I double head 2 GP 40's and only a couple of cars and a caboose . Just over 70" then up to a semi dogbone . with the EZ track there is a small transition. I beat my brains up about ,but it didn't really hurt or make a difference on traveling up and down the grade .If you get more complexed and prototypical yes you can put a piece of flex track at the start of the transition so it will be gradual and not a quick angel .But again if you place them right you really can't tell a difference .But remember depending on the grade determines the number of cars you can pull up and down the grade without slippage and possible derails and runaway trains. And like Mister Ward said they are easy to work with and are adaptable to scenery ...

regards MF5117 RR
Logged
mf5117

View Profile
« Reply #4 on: January 27, 2011, 09:42:30 PM »

oh and rule of thumb is a 1/4" in. rise in 1ft of track . The less rise in a foot is better but space is an issue sometimes . An Nmra gauge will give you proper tunnel and portal height .If you have access to one. You can pick one up at your local hobby shop if you need . around 10.00 to 15.00 us $ .
Logged
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!