News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

ho 4-8-2 side rods

Started by ken black, March 16, 2011, 01:59:04 PM

Previous topic - Next topic

ken black

Hi I have a heavy mountain 4-8-2. The side rods will not stay in place the pins keep comming out of there plastic holes. Is this a problem I can fix? I do not want to send it back because iI was told they would not fix it but would replace it .

richg

Use a tiny drop of ACC on a toothpick and I mean, tiny.
I have use a tiny drop of blue loctite, a thread locker as being a mechanic, I have a bottle of the stuff. It is a temporary type thread locker. The red is permanent.
All you need is a "film" of the stuff.

Rich

jonathan

I have successfully used loctite on older locomotives:  Varney, Bowser, Mantua and the like.  Never had to use it on a modern locomotive.  Doesn't take much.  You don't want the goo to leak out onto the eccentric crank or other moving parts.

Regards,

Jonathan

ken black

Thank you for your help I never thought of using loctite I had some in the shop it worked great thank you Ken