electrical contact springs to send track power to motor.

Started by Walter Seiler, March 25, 2011, 04:01:31 PM

Previous topic - Next topic

Walter Seiler

the spring(s) that makes the contact from the track power to the body(motor) are not usable for repair. How do I get replacement springs?

jonathan

Can you be more specific?  (loco type, age, etc)

There is a parts dept.  Click on "Parts & Svc" above. 

R,

Jonathan

CNE Runner

...or you could install Tomar Locomotive power pick ups. Check out their website for more information. I use these pick ups on my transfer tables and they work extremely well (someday the plan is to install them on my Bachmann Plymouth WDT and eliminate the unreliable axle-to-frame electrical connection).

Ray
"Keeping my hand on the throttle...and my eyes on the rail"

Doneldon

Walter-

Or are you asking about the connections to the motor's brushes? If so, there may be better options than replacing just the brushes, depending on what you have. Please give us some more details.
                                                                                                                        -- D