Welcome, Guest. Please login or register.
Did you miss your activation email?
June 24, 2021, 07:51:04 AM
Home Help Search Login Register
News: Check out the photo gallery link above or >click here< to see photos of recently announced products!
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  General Discussion
| | |-+  5 AMP Booster with dynamis Pro
« previous next »
Pages: [1] Print
Author Topic: 5 AMP Booster with dynamis Pro  (Read 2254 times)

View Profile
« on: August 15, 2012, 09:13:34 PM »

Does anyone have a schematic of how to hook up the 5 AMP booster to the Dynamis system with the Pro Box.  I do not want to purchase a booster (even though I need one) without knowing if I lose the Programming Track ability.  Also can you add 2 boosters and what would this look like?

View Profile
« Reply #1 on: August 16, 2012, 07:46:16 PM »

See other post on this board regarding booster

View Profile
« Reply #2 on: September 14, 2012, 04:03:22 PM »

So I spent a month following your thread and looking for this answer with no luck so I will try again.  With the Dynamis Pro box, can I run 2.3 amps to one isolated section, and also run the bus wire to a booster (and I do not care about extra cost of Bachmann 5 amp booster).  Will output to that booster produce 5 amps to it's own isolated section and will there be any issue with the amp difference when the engine crosses over from one section to the next.  I am not concerned that the programming track, run from the command station box output halts the rest of the system during the programming period.  I also am asking for help on how to add a second booster.  Does it hook up to the first booster, or also get connected to the power bus.  It seems that all the diagrams I can find use a cab bus output which my Dynamis does not have.  I believe i understand my output needs and my long term plans are marginal for 5 amp total but probably not if I can split 2.3 and 5 amp outputs.  If I can not do this, then I will need 2 boosters, hence my double pronged question. 

Thank you for any support.
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!