News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

EZ track connection to NCE Power Cab

Started by bill collins, November 13, 2012, 07:23:20 PM

Previous topic - Next topic

bill collins

Is there any type adapter to connect from the power panel to the track. I'm just now converting to DCC and have a NCE Power Cab.
Perhaps it would be easier to just to use the EZ Digital Command System. Thanks in advance for any help.

richg

I have the NCE Power Cab. Connect two wires to the Cab, connect to the track. Not really very complicated.  I used #22 wire as I only run two locos. I converted my DC home layout that way. Very simple.
Some might use #18 if a medium size layout at home.
If you ever plan on maybe a bigger layout with say a five amp booster, then use #14 wire and #22 feeders.

Rich

Len

If you don't want to cut the wire that comes with a standard EZ-Track terminal section, pick up a 10ft Red Terminal Extension Wire (Item # 44498). Cut the male end off, split the wires apart, strip the ends, and you're ready to connect to your Power Cab.

Len
If at first you don't succeed, throw it in the spare parts box.