News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

MRCAutoReverse

Started by pjf, January 10, 2013, 06:43:34 PM

Previous topic - Next topic

pjf

Auto Reverse Module #AD520. Just installed one. Always shorts out coming out of the loop. Using Dynamis . It works with my EZ Command but not with Dynamis. Same layout same conditions and equipment. Please Help. Thank you pjf
Peter

bapguy

I had one of these that would work one way but not the other. Went to Digitrax web site and down loaded the instructions for theit AR1. The wiring diagram I got with the MRC unit was wrong. Wired it up according to Digitrax diagram and it worked. Try this first. How long have you been using the MRC unit? It could have gone bad. The one I had did.I replaced it with one from Digitrax as their's is adjutable on the AMP setting.   Joe

pjf

Thank you for your suggestion. Good news, courtesy my LHS the problam is solved.
The isolation at the entry and exit point need to be stagered just enough that the first two pick up wheels will not be in contact at the same time across the two rails. Cheers, pjf
Peter