Regarding EZ Street tracks...

Started by jpstrainyard, February 17, 2013, 02:07:06 PM

Previous topic - Next topic

jpstrainyard

JP of Acton MA, USA writes:

Does anyone know which sections of EZ Street tracks feature both the running rails and center rail power connection tabs on the underside?

-JP
Sincerely: JP

Joe Satnik

#1
Dear JP,

From the pdf download of the 2013 catalog, page 35:

" To add power to your E-Z Streetâ„¢ system, you must connect Power Wires (Item No. 00270) to the underside of a section of 10"
Straight Track (Item No. 00267).  "

Hope this helps.

Sincerely,

Joe Satnik

Edit: Added "page 35"
If your loco is too heavy to lift, you'd better be able to ride in, on or behind it.

jpstrainyard

JP of Acton MA, USA writes,

Hi Joe,

Thank you for replying. For some reason, I thought that both the 5in and the 10in sections had the power connectors on the underside. The curves only have power connectors for the running rails, and not the center rail, a bit unusual if you ask me.

-JP
Sincerely: JP

phillyreading

One set of wires that worked for me was Lionel's Fastrac hook-up wires, they connect directly to Super Streets, and I imagine they would connect to EZ Streets as well.

Lee F.