News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

dcc with sound

Started by joestrick, February 10, 2007, 07:34:39 AM

Previous topic - Next topic

joestrick

on my spectrum quick start guide, it lists over 17 sound functions, as bought functions 1-9 (0-8) are allocated, can i change these to other available sounds, by using the ez command centre?

Jim Banner

No.  For that you would need a more complicated, full function DCC command station.
Growing older is mandatory but growing up is optional.

Hoople

Quote from: joestrick on February 10, 2007, 07:34:39 AM
on my spectrum quick start guide, it lists over 17 sound functions, as bought functions 1-9 (0-8) are allocated, can i change these to other available sounds, by using the ez command centre?
E-Z command is too basic to prgram CVs.
Get a Digitrax Zephyr or a NCE Power Cab.
Then you can prgram the Tsunami to have its features.
You're missing out on a LOTto not program CVs, espacially on the Tsunami.
-Hoople-

Modeling UP, SP, and D&RGW in colorado between 1930 and 1960.

GIVE US HARRIMAN STEAMERS BACHMANN!

James Thomas

As I mentioned in a previous thread, the Precision Craft Models DCMaster control box will program CV's.  (I've used it to program Tsunami decoders.)It works very simply, and only costs less than $50.