News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Bachmann 2-10-0 lights

Started by ken black, April 27, 2013, 12:15:22 AM

Previous topic - Next topic

ken black

I have a new bachmann 2-10-0  dcc and tsunami sound I can not get the head light or the rear light to work  ken

ken black

Yes I have used 0 but the lights do not work is there another cv I can use Ken

jonathan

Another common issue in the tender/locomotive plug not being seated all the way.

Also, it is possible the decoder is plugged in backwards.  The loco will run in this case, but the lights won't work.

Regards,

Jonathan

ken black

It Is factory installed loco runs in right direction Could it still be backward ?

richg

Quote from: ken black on April 28, 2013, 11:08:21 PM
It Is factory installed loco runs in right direction Could it still be backward ?

I believe the LED is on the PC board and light is transmitted up to the tender light via a light pipe. Take the tender shell off and see if the LED is lighting up.

Rich

ken black

Thanks Rich I got the rear light to work pipe not connected  the front does not work  Thanks Ken