ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
November 21, 2019, 07:42:33 PM
Home Help Search Login Register
News: Please read the Forum Code of Conduct   >>Click Here <<
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  Large
| | |-+  Night Before Xmas train set G scale
« previous next »
Pages: [1] Print
Author Topic: Night Before Xmas train set G scale  (Read 5815 times)
golujan

View Profile
« on: November 22, 2013, 07:46:38 PM »

How many straight and curved steel tracks do I need to expand my current layout?? How many extra cars can I add to the train set??

Thank U

Lupe
Logged
Narrowgauge12

View Profile
« Reply #1 on: November 22, 2013, 09:22:24 PM »

You get the standard 4-6-0, a gondola and a bobber caboose. Usually you get a circle of tubular track with 2-4 straights. If i were you, i would try to find the old version of the set because it had one or two more cars and came with 4 more straights. Hope this helps Smiley 
Logged
Loco Bill Canelos

Model railroading since 1947


View Profile
« Reply #2 on: November 22, 2013, 11:56:46 PM »

Are you wanting to make a figure eight, or just make what you have longer? or get switches and make sidings?  Let us know. 

You have one of the best Christmas sets which includes the 4-6-0 with the version five chassis, it should give you years of good service.  As long as you keep the track level you could probably add one or two cars.

Have fun.
Logged

Loco Bill,  Roundhouse Foreman
Colorado & Kansas Railway Missouri Western Railway
Semi Official Historian; Bachmann Large Scale
There are no dumb or stupid questions, just questions!
Chuck N

View Profile
« Reply #3 on: November 23, 2013, 09:04:36 AM »

My answer to you first question is add as much track as you have space. 

You can add cars until the wheels on the engine start to slip.  Then remove at least two.  There are too many variables to say how many you can pull; are the wheels oiled, how much do they weigh,  radius of the curves are you using, etc.

If you are planning on only using the track indoors, the Bachmann tubular steel track is fine. 

Chuck
Logged
golujan

View Profile
« Reply #4 on: November 27, 2013, 11:37:44 AM »

I want to make the oval bigger. If I can make a figure 8 what do I need?
Logged
Chuck N

View Profile
« Reply #5 on: November 27, 2013, 01:02:33 PM »

Bachmann sells additional track pieces.  My suggestion is for this year add some sections of straight track to expand your oval.  Doing a figure eight will require more curves, straight  and a ninety degree crossing, also sold by Bachmann. 

Chuck
Logged
Loco Bill Canelos

Model railroading since 1947


View Profile
« Reply #6 on: November 27, 2013, 03:21:46 PM »

Hopefully our trackplan expert Joe Satnik will chime in here he can tell you exactly what you will need to do the figure 8.
Logged

Loco Bill,  Roundhouse Foreman
Colorado & Kansas Railway Missouri Western Railway
Semi Official Historian; Bachmann Large Scale
There are no dumb or stupid questions, just questions!
Joe Satnik


View Profile WWW
« Reply #7 on: November 28, 2013, 11:19:32 AM »

Loco Bill,

Track plan expert?  Hardly. 

I just understand a little bit about figure 8 geometry, and how to use the AnyRail.com track CAD program. 

Figure 8's are just plain fun. 

Not very prototypical, though. 

The main advantage for a model railroad is that they turn the train (or exercise it, or wear it out) in both left and right directions.

Here's the thread with the recipe that I generated before AnyRail.com added the half-straights to the tinplate G track library:

http://www.bachmanntrains.com/home-usa/board/index.php/topic,10407.15.html

Recipe is about 1/3 of the way down. 

Feel free to PM (personal message) me if needed. 

Fence to Fence (Table-Top) dimensions are important:  55" x 122", which includes room for 4-6-0 cow-catcher and roof overhang. 

Anyrail picture:



Hope this helps. 

Sincerely,

Joe Satnik
Logged

If your loco is too heavy to lift, you'd better be able to ride in, on or behind it.
Loco Bill Canelos

Model railroading since 1947


View Profile
« Reply #8 on: November 29, 2013, 09:59:22 AM »

You are too humble Joe, If I ever have a track question about the Bachmann Steel track you would be my go to guy.   Cool
Logged

Loco Bill,  Roundhouse Foreman
Colorado & Kansas Railway Missouri Western Railway
Semi Official Historian; Bachmann Large Scale
There are no dumb or stupid questions, just questions!
golujan

View Profile
« Reply #9 on: November 30, 2013, 11:16:40 PM »

Thanks for the info Joe. My last question would be can I put rechargeable 9V batteries into the passenger cars??

Lupe
Logged
GG1onFordsDTandI
Guest
« Reply #10 on: December 01, 2013, 02:38:03 AM »

It shouldn't care what type of batteries, rechargeable or not, it just must be 9vdc.
Logged
Joe Satnik


View Profile WWW
« Reply #11 on: December 01, 2013, 11:29:19 AM »

Dear Lupe,

Ah, yes, the lit passenger cars, a.k.a. "The 9 Volt battery killers".

A rechargeable battery should work well, and is probably the easiest solution to your battery drain problem.   

Another option you might want to consider is changing

the incandescent lights over to golden white LEDs (with resistors in series) to extend battery life. 

Use the search function to find old threads on the subject.

The newer Jackson Sharpe track powered passenger cars have pickups that add rolling resistance (drag) to the train and draw more current from your power pack.   

Hope this helps.

Sincerely,

Joe Satnik

 

Logged

If your loco is too heavy to lift, you'd better be able to ride in, on or behind it.
golujan

View Profile
« Reply #12 on: December 14, 2013, 12:49:34 AM »

This is for Joe Satnik who seems to be the expert around here. I bought a Lil Big Hauler 'North Pole Express Merry Xmas' caboose from e-bay. The stamp on the bottom says it's from Bachmann. The problem is that this caboose came with hook couplers. If I remove one of the hook couplers and install a knuckle coupler from Bachmann, The knuckle on the caboose is too high to engage the Bachmann car. Is there some kind of adapter from Bachmann that will make the knuckle on the caboose go to a lower height so that it will engage the Bachmann car??
Logged
Chuck N

View Profile
« Reply #13 on: December 14, 2013, 09:05:53 AM »

Bachmann has a stepdown coupler that should work.  Mine came with an engine, so I do not know the part number.

Here is a picture of the coupler. 



Chuck
Logged
golujan

View Profile
« Reply #14 on: December 18, 2013, 01:21:36 AM »

Thanks for the info Chuck. Almost no one here in El Paso seems to know about this adapter. I will report the part # once Bacmann delivers the item.
Logged
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!