ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
July 10, 2020, 07:57:38 AM
Home Help Search Login Register
News: Check out the photo gallery link above or >click here< to see photos of recently announced products!
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  Large
| | |-+  k 27 screws
« previous next »
Pages: [1] Print
Author Topic: k 27 screws  (Read 2519 times)
bob kaplan

View Profile
« on: March 06, 2014, 01:59:20 PM »

I hope to find about 8 of the screws that hold the counterweights to the axle of the k 27.  Of course they are not available.  So I looked carefully at the Connie and the screws look to be the same (# 10320) so I did a search and though the results said that number wasor an HO engine....I ordered....mistake.  They are not the same...
   Anyways does anyone know where I might obtain screw for the K 27 axles?  Thanks for the help.
Logged
grsman


View Profile
« Reply #1 on: March 06, 2014, 04:30:32 PM »

Bob
I looked at the parts diagram for the K-27 and it looks like the screw that holds
the counter weights on is #00219. It is on page 2 of 18.
That screw does not show at Bachmann as a K-27 part, but
according to the parts diagram it is correct. It shows as being in stock.
Do you have the parts diagram for the K-27? Look at it and see if you agree.
If you don't have it, it is available on Bachmann web site.
Tom
Logged
bob kaplan

View Profile
« Reply #2 on: March 07, 2014, 11:44:35 AM »

thank you Tom....I will most certainly give it a try......though when you search them, they are for the Decapod or Northern....HO scale....but lets see what happens.
 bob
Logged
bob kaplan

View Profile
« Reply #3 on: March 18, 2014, 04:41:18 PM »

Thanks Tom......ordered and receive the screws as you suggested...and they are correct!!  i'm happy.
Logged
grsman


View Profile
« Reply #4 on: March 18, 2014, 09:41:21 PM »

Thanks Tom......ordered and receive the screws as you suggested...and they are correct!!  i'm happy.
Bob
I am glad I could help.
Thank you for the reply. So many times you don't hear if the advice you offered helped.
Tom
Logged
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!