News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

k 27 screws

Started by bob kaplan, March 06, 2014, 12:59:20 PM

Previous topic - Next topic

bob kaplan

I hope to find about 8 of the screws that hold the counterweights to the axle of the k 27.  Of course they are not available.  So I looked carefully at the Connie and the screws look to be the same (# 10320) so I did a search and though the results said that number wasor an HO engine....I ordered....mistake.  They are not the same...
   Anyways does anyone know where I might obtain screw for the K 27 axles?  Thanks for the help.

grsman

Bob
I looked at the parts diagram for the K-27 and it looks like the screw that holds
the counter weights on is #00219. It is on page 2 of 18.
That screw does not show at Bachmann as a K-27 part, but
according to the parts diagram it is correct. It shows as being in stock.
Do you have the parts diagram for the K-27? Look at it and see if you agree.
If you don't have it, it is available on Bachmann web site.
Tom

bob kaplan

thank you Tom....I will most certainly give it a try......though when you search them, they are for the Decapod or Northern....HO scale....but lets see what happens.
bob

bob kaplan

Thanks Tom......ordered and receive the screws as you suggested...and they are correct!!  i'm happy.

grsman

Quote from: bob kaplan on March 18, 2014, 04:41:18 PM
Thanks Tom......ordered and receive the screws as you suggested...and they are correct!!  i'm happy.
Bob
I am glad I could help.
Thank you for the reply. So many times you don't hear if the advice you offered helped.
Tom