Home
ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
January 17, 2021, 12:19:58 PM
News:
Check out the photo gallery link above or
>click here<
to see photos of recently announced products!
Bachmann Message Board
Discussion Boards
Large
Rail clamps
« previous
next »
Pages:
1
[
2
]
Author
Topic: Rail clamps (Read 6754 times)
Chuck N
Re: Rail clamps
«
Reply #15 on:
April 26, 2014, 10:18:53 AM »
Frank, the easiest way I have found to remove LGB rail joiners is to use a hammer and a large screwdriver.
Place the track on a hard surface and put the blade on the top of the joiner up against the end of the rail and give the end of the screw driver a tap or two with the hammer. You will have to secure the track so it doesn't move. The rail will slide back and you can then lift out the joiner. Slide back the rail into its original position and you are ready to go.
This does not work on switches, crossings, power tracks, etc. Just regular track.
Chuck
This only works on LGB TRACK.
Logged
fhenn
Re: Rail clamps
«
Reply #16 on:
April 26, 2014, 10:56:49 AM »
Thank You that is just about what I am doing
Logged
Pages:
1
[
2
]
« previous
next »
Jump to:
Please select a destination:
-----------------------------
Discussion Boards
-----------------------------
=> General Discussion
=> E-Z App
=> Large
=> Williams by Bachmann
=> On30
=> Plasticville U.S.A.
=> HO
=> Thomas & Friends
=> N
-----------------------------
Frequently Asked Questions (F.A.Q.s) - READ ONLY FORUM
-----------------------------
=> General Questions
=> Large Scale
=> Williams by Bachmann
=> On30
=> HO
=> N
=> DCC
Powered by SMF
|
SMF © 2015, Simple Machines
Loading...