ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
October 23, 2020, 01:34:09 AM
Home Help Search Login Register
News: Please read the Forum Code of Conduct   >>Click Here <<
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  Large
| | |-+  Large scale 3 truck shay rear Female universal drive shaft
« previous next »
Pages: [1] Print
Author Topic: Large scale 3 truck shay rear Female universal drive shaft  (Read 2531 times)
fockewulf37

View Profile
« on: August 28, 2014, 08:10:14 AM »

Hey Guys,
 Not sure if anyone else has had this problem or not. But I have a modular railroad and I take my 3 truck shay in and out of the box a lot. Well the  rear  Female universal drive shaft when disconnected tend to fall lower than the wheels on the truck. The last time i put it in the box It must have hit first breaking the one of the ears off of the shaft.
 I have checked and there is no replacement part. So I took the metal drive shaft out and molded the end of it. I then cast one in resin. I took the one that was broken and cut off the end that was broken. I Then  drilled out the end of the female shaft with a 5/32 drill. I put the new cast piece in and it was a snug fit. I then use about a drop of thin CA. I painted it black. I re-installed the  rear  Female universal drive shaft into the Shay. I ran the shay for 5 hours at the last show and it runs great.
 If anyone else needs the one contact me. I can make more...

Well i have pictures but it won't allow me to upload them

Ty
Tysplanes.com
Logged
fockewulf37

View Profile
« Reply #1 on: August 28, 2014, 10:19:30 AM »





Part fixed and painted

Logged
tac

View Profile
« Reply #2 on: August 28, 2014, 12:37:07 PM »

I can see a time when parts like this one, no longer available from Bachmann, are going to be 3D printed instead.  Here in UK we already have one company who prints narrow gauge slate cars in FIVE scales - from 009 right up to 7/8ths.

tac
Ottawa Valley GRS
Logged
Loco Bill Canelos

Model railroading since 1947


View Profile
« Reply #3 on: August 28, 2014, 09:50:10 PM »

Nice work Ty!! Cool
Logged

Loco Bill,  Roundhouse Foreman
Colorado & Kansas Railway-Missouri Western Railway
Official Historian; Bachmann Large Scale
Colorado RR Museum-Brakeman-Engineer-Motorman-Trainman
There are no dumb or stupid questions, just questions!
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!