ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
January 28, 2020, 04:03:21 PM
Home Help Search Login Register
News: Check out the photo gallery link above or >click here< to see photos of recently announced products!
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  Large
| | |-+  K27 Main board
« previous next »
Pages: [1] Print
Author Topic: K27 Main board  (Read 1472 times)
armorsmith


View Profile
« on: August 30, 2014, 06:24:55 PM »

I am converting my K27 to run both battery and R/C, using Air Wire 900 G2. There are three locations on the main board marked 'R' and three marked 'L'. Two are on the sides of the board and picked up the leads from the tender trucks. One each of the R and L pads are on the end of the board connecting to the connector on the floor of the tender for the loco connector. It appears that the side pads are connected together, but not so with the pads on the end of the board. My intent is to place the receiver between the battery/track power and the main board (yes there will be a bridge rectifier on the track power side to maintain polarity). My question is - Do I need to provide power to the R and L pads on the end of the board separately from the side pads or are the connected together else where in the workings of the main board? Thanks in advance.
Bob C.
Logged
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!