Difference between Bachmann Decoders #44915 & #44913?

Started by JimJim, November 14, 2014, 02:40:48 PM

Previous topic - Next topic

JimJim

Hello All,
Can anyone tell me the difference between the Bachmann #44915 versus the #44913 decoder?
They both have wiring harnesses as opposed to the 8-pin plug found on other decoders. They also both came in three packs labeled #44914.
Looking at the instruction sheets that came with them they seem identical.
Any help would be greatly appreciated.
"Uhh...I didn't know it was 'impossible' I just made it work...sorry!"

Hunt

They are same basic 1 amp decoder. Wiring harness type is the difference.
# 44913 has wire harness bare end. Packaged 1 per card
# 44915 has wire harness with NMRA 8-pin plug. Packaged 1 per card

# 44914 has wire harness bare end. Packaged 3 per card
# 44916 has wire harness with NMRA 8-pin plug. Packaged 3 per card

Info and image can be found in the Bachmann Online store.

JimJim

Thank you for the clarification. Basically the same decoders.
I was hoping that one of them had a "secret" function like flight or a proximity stop function (anti-crash).
Thank you again.
"Uhh...I didn't know it was 'impossible' I just made it work...sorry!"