ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
July 20, 2019, 02:12:28 PM
Home Help Search Login Register
News: Check out the photo gallery link above or >click here< to see photos of recently announced products!
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  N
| | |-+  #6 Single Crossover turnout
« previous next »
Pages: [1] Print
Author Topic: #6 Single Crossover turnout  (Read 3800 times)
karlac

View Profile
« on: January 09, 2016, 05:38:15 PM »

I am just built a N scale layout with one crossover. My problem now is the red and green wire that comes with it is too short
to reach my power pack and speed controller, how can I make the wire's longer to reach the power pack?
Logged
Franz T

View Profile
« Reply #1 on: January 09, 2016, 07:12:59 PM »

Splicing??
Logged
Hunt
?
MBB


View Profile
« Reply #2 on: January 09, 2016, 09:00:05 PM »

To see what Bachmann has to offer  Click Here and then
Search
44498
44598
Logged
brokemoto

View Profile
« Reply #3 on: January 10, 2016, 10:10:10 AM »

B-mann does sell extension cords for the switch machines. 

You can put the turnout controllers next to your power supply, so you will not need an extension for that.  You can buy green extension cords that go from the turnout to the controller boxes.   If you have more than one turnout, you can gang the controller boxes together simply by plugging one into the other.  This will get the electric to the boxes.  You then run the green extension from the top of each controller box to the cord that goes from the turnout.
Logged
gatrhumpy

View Profile
« Reply #4 on: January 11, 2016, 02:18:33 PM »

You can easily extend wires by soldering new wires to the old ones and using heat shrink tubing. You can google this.
Logged
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!