Welcome, Guest. Please login or register.
Did you miss your activation email?
August 11, 2020, 03:54:06 PM
Home Help Search Login Register
News: Please read the Forum Code of Conduct   >>Click Here <<
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  Large
| | |-+  Using Bachmann couplers on other makers trucks
« previous next »
Pages: [1] Print
Author Topic: Using Bachmann couplers on other makers trucks  (Read 1721 times)
Chuck N

View Profile
« on: February 03, 2016, 11:46:41 AM »

There has been some discussion of adapting Bachmann knuckle couplers to other manufacturers trucks.  This is what I have done.

I drill a hole in the truck tongue right behind the coupler shank and infront of the axle.  I then screw in a "small screw eye" that I got at ACE, part number 76454.  This is a USAt Arch Bar truck.

Insert the plastic rod into the eye and then attach the coupler to the truck tongue.  The plastic rod does rub against the axle, but it doesn't seem to be a problem.  If you cut it off between the eye and the axle, the remaining stub may fall out of the eye on a tight curve.


I think that you could insert the eye between the mounting screw and the end of the coupler shank, this would permit you to be able to cut off some of the plastic rod and still keep it in the eye.

« Last Edit: February 03, 2016, 11:50:00 AM by Chuck N » Logged
Loco Bill Canelos

Model railroading since 1947

View Profile
« Reply #1 on: February 03, 2016, 12:33:04 PM »


Thanks for posting this elegant  Cool solution to adding Bachmann knuckle couplers to other brand trucks.  I already have plans to use your idea.  I use only Bachmann and USAT knuckle couplers, since both couple together with no problems.  I convert all my other brand cars to one or the other.  You just made it simple.

Great solution!!!!

Loco Bill,  Roundhouse Foreman
Colorado & Kansas Railway Missouri Western Railway
Semi Official Historian; Bachmann Large Scale
There are no dumb or stupid questions, just questions!
Chuck N

View Profile
« Reply #2 on: February 03, 2016, 12:43:11 PM »


Thanks for the comments, glad to be able to help.

Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!