ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
July 03, 2020, 07:33:47 PM
Home Help Search Login Register
News: Please read the Forum Code of Conduct   >>Click Here <<
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  Large
| | |-+  Bachmann LS Climax Tsunami 2 TSU-4400 Sound Decoder wiring question
« previous next »
Pages: [1] Print
Author Topic: Bachmann LS Climax Tsunami 2 TSU-4400 Sound Decoder wiring question  (Read 202 times)
Tom Lapointe


View Profile
« on: March 11, 2020, 11:03:29 PM »

Hello Mr. Bach-man!  Smiley
Just picked up one of the last - run Bachmann LS Climax locos to replace my oldest Bachmann loco - an original-production LS Climax (think I bought that loco something like 16 years ago; it still runs but is a VERY tired old loco).  Bought a Tsunami 2 TS-4400 4 amp Sound decoder for it; this is a screw-terminal decoder, so I'm wiring it through the Jumper PC board supplied with the loco.  Basic functions such as motor control & forward headlight are working fine; with the built-in speaker, sound quality is AWESOME.  Cool There are a few items which aren't clear , though; wiring for the backup light (the pinout diagram in the manual specifies J1 pin 4, a white wire, as "Front Locomotive Headlight"); what pin is the Rear Headlight?  J1 Pin 8 is listed as the Smoke Unit; J2 Pin 8 as Cab lighht, & J2 Pin 10 as Firebox Flicker.  The TSU - 4400 has 4 additional function screw terminals; I'm going to research a bit on the Tsunami site & see if there are any specific recommendations for the use of those, but any info your guys might have would be appreciated. 😉

Tom Lapointe
Logged
jviss

View Profile
« Reply #1 on: March 12, 2020, 07:50:09 PM »

I'm not Bach-man, of course, but I was curious.  It's odd that there's no wiring diagram in the Climax drawings.  But, the K-27 drawings have pinouts for J1 and J2, and the functions you mention line up.  If it's indeed the same, the rear light is J1-9.  Here's the K-27 drawing:
https://www.bachmanntrains.com/home-usa/dwg/dwgs/83093.pdf
Logged

Bachmann Big Hauler fan
Pennsylvania Railroad Set - generation 3 locomotive
Emmet Kelly Circus set - generation 3 locomotive
Open Streetcar
4-6-0 D&RGW "Bumblebee" Anniversary loco
various passenger cars and rolling stock
indoor, temporary at this point
DCC: Digitraxxxxx Super Chief Xtra 8A
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!