ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
December 13, 2018, 03:27:01 AM
Home Help Search Login Register
News: Please read the Forum Code of Conduct   >>Click Here <<
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  HO
| | |-+  5 amp Boosters
« previous next »
Pages: [1] Print
Author Topic: 5 amp Boosters  (Read 912 times)
roundhouse foreman

View Profile
« on: December 30, 2017, 02:42:41 PM »

Will the E-Z Command 5 a booster work on a DYNAMIS PRO system?
Is a BOOSTER a BOOSTER?

RHF
Logged
Hunt
?
MBB


View Profile
« Reply #1 on: December 31, 2017, 01:35:02 PM »

Quote

Will the E-Z Command 5 a booster work on a DYNAMIS PRO system?


Dynamis plus Dynamis Pro Box = Dynamis Pro system

Yes, when connect Dynamis  > Dynamis  Pro Box  >  E-Z Command 5 Amp Power Booster > track

No, when Dynamis Pro system  -  connect Dynamis to one power district and connect Dynamis Pro Box to power booster to another power district. 


Quote


Is a BOOSTER a BOOSTER?


DCC power booster and DCC programming track booster are not interchangeable.

Verify with the DCC power booster manufacturer it is compatible with the DCC command station.   





Logged
roundhouse foreman

View Profile
« Reply #2 on: January 02, 2018, 01:39:08 PM »

Thanks HUNT, just what I needed to know and the hookup diag's are a bonus.

RHF
Logged
roundhouse foreman

View Profile
« Reply #3 on: January 11, 2018, 12:41:13 PM »

So got booster.
Good thing Hunt gave diag because Bachmann does not.
I have the Dynamis IR Pro system. What's the hookup for that.
There is no program track connection available with the EZ Command Booster.
Do I still use the same output source from the Dymanis for programming and also to the booster?
You tube for this shows runaway situations.

RHF
Logged
roundhouse foreman

View Profile
« Reply #4 on: January 12, 2018, 08:40:57 PM »

Cobbled a couple cables and plugged them in flipped the switch to 18 v because I have a Spectrum 10 passenger car consist and std lighting so big draw.
All loops hi ballin' with a mix of old and new steamers. My older BLI is sensative to signal and when it restarts the current draw is now obvious as the booster kicks in. Seeing that points me to the source of the problem I had of tripping off randomly.

RHF
Logged
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!