ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
December 05, 2020, 05:23:57 AM
Home Help Search Login Register
News: Check out the photo gallery link above or >click here< to see photos of recently announced products!
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  General Discussion
| | |-+  DCC train set
« previous next »
Pages: [1] Print
Author Topic: DCC train set  (Read 1340 times)
Rupa

View Profile
« on: April 23, 2018, 01:47:52 PM »

Muy name is Andres and I have 2 train set DCC. my question is how I must to connect ( 4 )  Standar Remote Turnout HO Scale ( Item Nš 44562 )
I understand that I need a separated Transformer to connect this. Wish voltage it mus be and in AC or DC. Do not forgete that I will use this in the DCC Set

Thack you in advance
   
Logged
Razmataz

View Profile
« Reply #1 on: April 24, 2018, 09:36:43 PM »

I have a dcc track and I used the standard remote turn out. I took an old transformer from a no longer used electronics. ive heard them refered to on this forum as " wall warts" I cut the end off and used it to power the switch. this also works on dcc.
this website helped a lot https://ncedcc.zendesk.com/
« Last Edit: April 24, 2018, 09:39:55 PM by Razmataz » Logged
jward


View Profile WWW
« Reply #2 on: April 24, 2018, 09:46:48 PM »

The switch motors will work on either AC or DC. Traditionally, they are wired to the AC terminals of a power pack, but if you have one with constant DC terminals you can use them as well. The important thing is to NOT use the variable DC terminals.
Logged

Jeffery S Ward Sr
Pittsburgh, PA
Rupa

View Profile
« Reply #3 on: April 24, 2018, 11:00:10 PM »

Thank, but haw many Volts is the vest
Logged
Rupa

View Profile
« Reply #4 on: April 24, 2018, 11:00:49 PM »

Sorry BEST
Logged
Rupa

View Profile
« Reply #5 on: April 24, 2018, 11:03:43 PM »

Sorry for my English, I'll ask the question again. What voltage is the best in these cases (12 or 16 Volts)
Logged
Len

View Profile
« Reply #6 on: April 25, 2018, 12:36:45 AM »

My experience has been 14-16V works best. 12V may work, but can get "iffy" if dust or dirt starts getting in the works.

Len
Logged

If at first you don't succeed, throw it in the spare parts box.
Rupa

View Profile
« Reply #7 on: April 25, 2018, 03:02:56 PM »

Len, thank you very much

Andres
Logged
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!