ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
October 13, 2019, 05:35:01 PM
Home Help Search Login Register
News: Please read the Forum Code of Conduct   >>Click Here <<
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  General Discussion
| | |-+  Remote switches
« previous next »
Pages: [1] Print
Author Topic: Remote switches  (Read 216 times)
Rjs650913

View Profile
« on: December 11, 2018, 12:39:17 PM »

How do I connect remote switches with a dcc controller?
Logged
Hunt
?
MBB


View Profile
« Reply #1 on: December 11, 2018, 01:09:56 PM »

Bachmann non-DCC turnout wiring and powering

Use the accessory AC terminals of a DC model train power pack to power the switch machine in the E-Z Track Turnout.
Click Here for Bachmann instructions.


In place of power pack you can use a wall wart transformer rated 12 to 16 volts output at 500 milliamps (mA) up to 1 amp.  Either AC or DC output wall wart transformer will work.  Cut off the plug to connect.

Connect the controllers (black slide switch) together, and connect the red wires from the AC terminals to one controller. The green wires connect from each turnout to its controller.

You line the turnout (move the rails) with the controller (slide switch). Depending on the turnouts you have you may have to very briefly press down the controller once you move the slide switch. DO NOT hold it down or you will damage the switch machine in the turnout.

Bachmann video
Click Here for Bachmann video. Remote turnout comes with type A side switch but type B is shown in video.


Logged
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!