Welcome, Guest. Please login or register.
Did you miss your activation email?
October 22, 2020, 02:12:57 AM
Home Help Search Login Register
News: Please read the Forum Code of Conduct   >>Click Here <<
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  General Discussion
| | |-+  NCE Power Cab throttle issues
« previous next »
Pages: [1] Print
Author Topic: NCE Power Cab throttle issues  (Read 713 times)

View Profile
« on: February 25, 2019, 11:23:10 AM »

the issue I have with the Power Cab is initially, for speed, it gave my even increments of 4 for the "increase fast and /decrease fast" speed buttons, and also "increase/decrease" of 1 each time you hit it for the other 2 buttons, and the speed wheel in the middle of these 2 sets of buttons  -  now, I got 3 locos running, and they all give me that 1 "increase/decrease", and the 4 "increase/decrease", with a maximum of 28 - next time I use the Power Cab, out of the blue, and with me giving no further input, the locos starting running even increments of 10, with a maximum of 126 - I preferred this, but the damn Cab goes back to "1 and 4, with a max of 28" on it's own - it has gone back and forth a few times now - the locos still operate fine under either speed settings, but I prefer to stay at the "10, max 126" specs -

View Profile
« Reply #1 on: February 25, 2019, 01:29:05 PM »

This isnít a Bachmann product so Iíll keep it brief.

1. Join the NCE forum and ask the question.  Youíll get an answer.
2.  Call NCE.  They are friendly and accommodating. Iíve sent my NCE cabs back several times for repairs (after dropping it usually ) or upgrades and theyíve never charged for it.

Advice:  have a spare cab so you can keep on operating while repairs are in progress.

Modeling the New Iberia and Northern 1945

View Profile
« Reply #2 on: February 25, 2019, 04:23:59 PM »

I have the Power Cab and I agree with Trainman203. NCE repaired for me free because I had registered with them. Cab back light.
There is an NCE Group. It use to be a Yahoo Group but has a new name. This might be it.

Good luck.

« Last Edit: February 25, 2019, 04:31:28 PM by rich1998 » Logged

View Profile
« Reply #3 on: February 28, 2019, 09:47:46 AM »

thank you guys - I'm going over to that web site you mentioned
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!