ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
October 22, 2019, 07:31:06 AM
Home Help Search Login Register
News: Check out the photo gallery link above or >click here< to see photos of recently announced products!
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  General Discussion
| | |-+  DCC - Roco z21
« previous next »
Pages: [1] Print
Author Topic: DCC - Roco z21  (Read 225 times)
JTRogman


View Profile
« on: June 08, 2019, 09:22:47 AM »

 Smiley Hi, FUZZY here...

I have been model railroading for ---- ever. I did DC and thought I would try the DCC. I'm old, the kids today would comprehend it much better.

Now to my problem...

I have purchased a Roco z21 starter set, it has the hard wired MultiMAUS . I have been trying to set up my Turnouts. When I first started, hooked up the tracks/switches and powered it up I could run my engine. No problem.

I removed the engine from the tracks and attempted to program the 4 Turnouts that I have. Unfortunately they are wrong. The ICON on the "MultiMAUS" shows "straight-on" but the actual Turnout on the track is  "branch-off".

So how do I change the value for a Turnout in CV34 from 0 to 1 or 1 to 0, in the MultiMAUS 10810.

I have attempted many times to re-program them but it keeps going back to the wrong setting. As of right now, I have four (4) turnouts, all wrong.

Roco Booklet 51250...This is not clear as to how to get to CV34.
[Normal switching direction of the turnout can be inverted by entering the value 1 in CV34. The resulting effect is inverted switching for the same sent straight/branch command.]

There have to be some comprehensive "step-by-step" directions somewhere.
Please help if you can.

Thank you.
FUZZY
Logged
JTRogman


View Profile
« Reply #1 on: June 08, 2019, 09:37:54 AM »

TESTING to see if this works for the first time.
Logged
JTRogman


View Profile
« Reply #2 on: June 08, 2019, 09:54:50 AM »

test #2
Logged
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!