ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
September 30, 2020, 01:13:51 AM
Home Help Search Login Register
News: Please read the Forum Code of Conduct   >>Click Here <<
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  Williams by Bachmann
| | |-+  Traction tires Alco PA-1
« previous next »
Pages: [1] Print
Author Topic: Traction tires Alco PA-1  (Read 1171 times)
Ruslsdad

View Profile
« on: February 13, 2020, 10:57:09 AM »

I don;t understand why Bachmann would not have replacement parts for it's products. I recently bought a gently used but fairly old Alco PA-1 and need new traction tires for it. Can anyone help me out?
Logged
Len

View Profile
« Reply #1 on: February 13, 2020, 12:55:00 PM »

Except for a few "SD's", almost everyone's diesels use the same size traction tires. These should work:
https://www.trainz.com/products/lionel-222-108-diesel-rubber-tire-6000222108

222-108 is the old number, 6000222108 is the new number.

Also available from 'The Train Tender': http://www.ttender.com
Note: Only accepts checks or money orders.

Len
Logged

If at first you don't succeed, throw it in the spare parts box.
Ruslsdad

View Profile
« Reply #2 on: February 13, 2020, 02:48:57 PM »

Len,
Thanks for the info. I ordered from Trainz. Let's see how it goes.
I wonder why Lionel and MTH dealers don't know this?
Logged
Len

View Profile
« Reply #3 on: February 13, 2020, 09:32:01 PM »

Unless they have an in store repair shop, most dealers will refer someone looking for parts to the manufacturer. I used to operate a repair shop and still have most of my parts references.

Len
Logged

If at first you don't succeed, throw it in the spare parts box.
Ruslsdad

View Profile
« Reply #4 on: February 14, 2020, 10:08:22 AM »

Len,
I appreciate your help since I know little to nothing about this hobby. I do live in an over 55 community that has a train club. We do have some very knowledgeable people in the group though. So I can get referrals and help.
Thanks again,
Fred
Logged
trainyardjp


View Profile
« Reply #5 on: February 23, 2020, 11:53:55 PM »

JP of Acton MA, USA writes,

If folks are having difficulty with finding parts dealers or parts sources for traction tires, here is an 'interesting' product, Bullfrog Snot - http://www.bullfrogsnot.com/ (no, it is not actual 'snot' extracted from bullfrogs). This is basically a 'liquid traction tire' compound that will work for any scale of model train (Z to G). Use a cotton swab to coat the locomotive's wheels with this compound. When the compound 'sets' then dries, it leaves behind a rubbery surface that will help the locomotive's pulling abilities.

Hope this helps.
-JP
Logged

-JP
Ruslsdad

View Profile
« Reply #6 on: February 24, 2020, 08:47:38 AM »

Len and JP,
I received the traction tires you told me about and manages to get them on. I have never done this before and am not a real handy guy.
Well long story short, I got the rear 4 on easily, because they made the truck assembly simple wit a bracket held on by one screw. But of course the front was not the same way. I wrestled with 3 of the 4 and got them on. The last one had to be the most difficult. I think what is either the brake assembly or the sand nozzle was positioned too close. I tried gently prying it away, because knowing me, I stopped for fear of breaking it off. After more sweat, I finally got it on. All is well. Thanks for your help.
Fred
Logged
Len

View Profile
« Reply #7 on: February 24, 2020, 10:34:20 AM »

I should have mentioned the General Tools 862 3-piece probe set is real handy for getting traction tires on in tight places. In particular the one with the double bend on the right of this pic:


You can find them at most home improvement stores and a lot of hardware stores for around $10. If you can't find them locally, Amazon has them.

Len
Logged

If at first you don't succeed, throw it in the spare parts box.
Ruslsdad

View Profile
« Reply #8 on: February 24, 2020, 10:50:54 AM »

Len,
Thanks. I used a flat blade screw driver. I slowly worked it around. I don't know if that will be any easier. I also don't know that I will ever do that again.
Fred
Logged
Ruslsdad

View Profile
« Reply #9 on: February 28, 2020, 02:06:03 PM »

Len,
I had a friend come over to look at the Alco engine and traction tires. He said that between the traction tires and the wheels, there were different sizes. Some of the tires were wider than the truck wheels. He made sure all was right with the unit and ran it. He said that the tires would need to "wear in." So I will use it and hope for the best.
Regards, Fred
Logged
momotrain


View Profile
« Reply #10 on: September 24, 2020, 09:25:16 AM »

JP of Acton MA, USA writes,

If folks are having difficulty with finding parts dealers or parts sources for traction tires, here is an 'interesting' product, Bullfrog Snot - http://www.bullfrogsnot.com/ (no, it is not actual 'snot' extracted from bullfrogs). This is basically a 'liquid traction tire' compound that will work for any scale of model train (Z to G). Use a cotton swab to coat the locomotive's wheels with this compound. When the compound 'sets' then dries, it leaves behind a rubbery surface that will help the locomotive's pulling abilities.

Hope this helps.
-JP

Thank you very much! That was very helpful my dear friend!
Logged
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!