News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Ken's Railroad

Started by Ken Huck, July 13, 2020, 03:17:55 PM

Previous topic - Next topic

Ken Huck

Sorry Oldtimer, it's Spitfire fodder (ME109).  Once in a while I'll do a 1/32 scale aircraft. 
Got scads of 1/35 scale armor too.

...anyway, back to rairoad.  The next photos were taken following a train around the 'loop'.
My mainline is basically a double-folded dog-bone.

Starting at the top, near the main yard, after being made up, the train pulls away.



After going East it makes a leftward turn down a one and half percent grade.



After crossing Johnny's river and rounding the poor side of town, it reaches the ore mining area
of the layout.



Passing the mining area it enters its first tunnel.



Coming out of the tunnel on the lower level, it passes the coal mine at Hooterville.



Coming out of the second tunnel (while the caboose is still going in) it starts across
a large trestle.



Crossing the trestle it enters the double tunnel heading back up hill.  The entire train
will be completely in the tunnel this time before the engines exit.



Coming out of the tunnel, it would've entered a siding to set out/pick up any ore cars.



Now it's heading back up to the yards.



Back on level ground, it slows a bit before crossing another trestle.



After crossing the trestle (and crossing another), it approaches the yards.



Back where it started.



Hope you enjoyed the trip.

More to follow.

Ken

WoundedBear

Loved it. Nice little trip around the layout.

Sid

OLDERTIMER


Terry Toenges

#18
I like the way you did that so we could keep "track" of the route. It looks so much more complicated when looking at it from a distance but that is good.
Feel like a Mogul.

Ken Huck

Another little update:

With the recent addition of a new country church and school, the poor old souls
in the poor side of town found themselves on the wrong side of Johnny's river so
they decided to build themselves a bridge.

First the void:



I decided to scratch-build something.  So, with three different sizes of match
sticks and split bamboo skewers I set off...



At this point, I wasn't sure what TYPE of bridge I wanted.  A simple truss of some sort
would've been a good choice.  I already had a couple of those.  Then I thought:
A covered bridge !

Next, I started on the lattice that would support the sheathing.



At this point I thought:  What have gotten myself into ?
This is how far I've gotten so far.  Cutting and splitting bamboo skewers takes a
while.



Hopefully, by the end of this quarantine, I'll have made more progress.

More to follow,
Ken

Gee, ...a plank roof or a shake one ?


WoundedBear

That's a lot of sticks man ;D

Little projects like this are always fun.

Sid

Len

Did you do the upper beam using pegged halved bridled and squinted scarf joints?



Len
If at first you don't succeed, throw it in the spare parts box.

Ken Huck

I just knew I forgot something !  ::)

Ken Huck

A little more bridge update, I've started on the roof.





Work is going a little slower because of all the tedious cut (approximately), split (and split again), glue
(wait 24 hours to dry), then sand smooth...and glue the next piece.

More to follow,

Ken

Ken Huck

Back again with another update.

A couple of views from the back side:





Starting to work a little on the 'approach'.



...and here's what it looks like down the street.



Enjoy, more to follow.

Ken

jonathan

Noice!

Appreciate all the effort for a small piece of scenery. Great stuff.

Regards,

Jonathan

Ken Huck

Thanks Jonathon, here's a bit more detail for scratch builders...



...and with the roof removed...



The Cowgirl Saloon out the back door...



With the roof removed.



...and the second floor removed.



And now for a 'covered bridge' update.





As you can see, I've been slowly working on the lattice and starting to experiment on the weathering.

Enjoy.  More to follow...

Ken



Ken Huck

Well, I finally followed 'Larry, the cable guys' advice and I 'got 'er done'.















Whew ! ! !  There's about eight hundred little pieces of matchsticks and bamboo
skewer parts used making that bridge.  I am glad I'm finished.  I still have to work
some on the 'bridgeheads' and approaches so...

...more to follow.

Ken

Terry Toenges

What a job. It looks great.
Feel like a Mogul.

jonathan

Really nice covered bridge! Some serious effort.

Enjoyed watching the build.  Thanks for sharing...

Regards,

Jonathan