Bachmann DCC Dynamis Arrives in USA

[richG]

I just copied a message I found in the Yahoo Bachmann DCC forum. I do not use it but people ask sometimes.
Quote:
- Don Culbertson <don30man@aol.com> wrote:

> Hi All,
>
> I posted a photo of the new Dynamis in operation. Holding the unit in

> my Right hand, I was able to run 3 DCC locos, using my Right thumb to

> control the speed, and using the side-to-side motion of the toggle to

> select the various locomotives. This is a real jewel. No other system

> that I am aware of can change decoder CV values on the fly. (I have
> been able to change the sound volume on different locos without
taking
> the other locomotives off the track). This is a super system!!!!
>
> See a photo of actual one-hand operation in the photos section.
>
> Don Culbertson
--------------------------------------------------------------------------------------------------------

Go join the group at: http://groups.yahoo.com/group/Bachmann_DCC/

Look in the photos section.

Rich

[Jim Banner]

Any system that allows OPs mode programming (e.g. Digitrax and others) will let you change CVs on the fly.  This is a really useful programming mode, both for fine tuning locomotives and for Advanced consisting.

Advanced consisting allows you to drive a locomotive up to another locomotive or consist and mu them together, even on the fly.  Best of all, it allows you to break a locomotive out of a consist and return it to normal operation even if you do not remember what consist the locomotive is part of.  Breaking up other types of consists can be a real problem, particularly if you operate trains with friends.