News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Brill trolley shell removal

Started by Paul M., March 06, 2007, 09:40:56 PM

Previous topic - Next topic

Paul M.

Does anybody know how to remove the shell of the brill trolley? I tried a little bit, but I didn't want to mess things up. I need to re-paint the trolley for my own "Emhurst Interurban" line . Any help will be appreciated. ;D

-Paul
[
www.youtube.com/texaspacific

Paul M.


-Paul
[
www.youtube.com/texaspacific

Paul M.


-Paul
[
www.youtube.com/texaspacific

Jim Banner

Paul, I have hesitated to reply because I am not absolutely sure that the H0 trolley that our group has was made by Bachmann.  With it, you gently pry one side of the body away from the frame, both near the front and near the back, then pull the frame down a bit.  Then you do the same with the other side.  The frame has four small tabs (2 on each side) that fit into slots in the body.

I hope this helps.
Growing older is mandatory but growing up is optional.

Jonathan MacCormack

Jim,

FYI

Page 53, 2007 catalog, Brill Trolley. Just in case you missed it while browsing. It may not be what your goup has on the layout.

Jonathan

Paul M.

Thanks, Jim. I'll try certainly try it.

-Paul
[
www.youtube.com/texaspacific