EZ Mate Mark II - compatible???

Started by colestrains, November 30, 2008, 08:26:04 AM

Previous topic - Next topic

colestrains

I'm really new to this...are the EZ mate mark II couplers compatible with the original EZ Mate couplers???

Sorry for the stupid question.

Jhanecker2

Yes they are compatible. They are both knuckle-couplers. They are also compatible with kadee couplers .  Good Luck. J2


ebtbob

Good Morning,

        All knuckle couplers on the market today,  except for those by a company called Sargent,  are compatible.
        In your post you mentioned the "original EZ Mate" coupler.   These are the EZ Mate I couplers and need to be trashed as soon as possible.   They have a major flaw and that is the fine plastic "cat's whisker" that helps to hold the knuckle closed.    These whiskers are easily mishapened so that they no longer do what was intended and then you have constant uncoupling of cars.
         This is also the same problem with the original couplers offered from McHenry.    So,  if you are going to buy plastic couplers look to see that there are brass coiled springs on the knuckles like the ones employed by Kadee.
        The best thing to do is get the Kadee line if you can.   They are metal and offer the most variety for different applications.

Bob
Bob Rule, Jr.
Hatboro, Pa
In God We Trust
Not so much in Congress
GATSME MRRC - www.gatsme.org