ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
August 08, 2020, 10:38:45 PM
Home Help Search Login Register
News: Please read the Forum Code of Conduct   >>Click Here <<
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  General Discussion
| | |-+  Wheels out of quarter?
« previous next »
Pages: [1] Print
Author Topic: Wheels out of quarter?  (Read 1194 times)
kit builder

View Profile
« on: April 29, 2009, 05:43:29 PM »

hello guys, Mr Newbie here.
  I would like to ask if anyone has experienced wheels being out of quarter but still true on their axles.I have a new USRA (HO) 2-10-2 which despite close examination from my ageing eyes is definitely showing signs of this problem.Would uyou suggest that I send the loco back to B or just try and get the offending axle set replaced.
  Would appreciate your practical advice.

Kit builder Cry
Logged
Jim Banner

Enjoying electric model railroading since 1950.


View Profile WWW
« Reply #1 on: April 29, 2009, 09:47:58 PM »

When wheels are press fit on axles and held in place only by friction, it is not unusual for them to be out of gauge and/or out of quarter but still running true.  Think about regauging a typical freight car wheel set.  We twist the wheel around the axle as we pull it out or push it in.  Neither the twisting nor the pushing and pulling cause the wheels to wobble unless we somehow manage to bend the axle.

How are you checking for out of quarter?  Sometimes a wobbly wheel looks like it is out of quarter when running down the track.  Both can cause little jumps at regular intervals.  So can a bent rod if it happens to hit something every turn of the driver.  If I suspect an out of quarter problem, I often pull the motor out of the locomotive so that it can free wheel.  Then it becomes quite easy to find the exact point where the mechanism binds, either by pushing the locomotive gently along the track or by holding it in one hand and using a finger of the other hand to slowly turn the gears.  And once you find out where in its rotation an axle binds, it is usually pretty easy to tell why it is binding just from feeling which rods are loose and which are under tension or compression.

It would certainly be fair to ask the service department if they are willing to send you a new axle set or if they need the locomotive back.  It is cheaper for them to mail you a new axle set than mail a whole locomotive, and less labour for them if you do the installation.

Jim
Logged

Growing older is mandatory but growing up is optional.
kit builder

View Profile
« Reply #2 on: April 30, 2009, 05:23:02 AM »

Thanks Jim,
I'll strip the offending beast down and give your suggestions a try... Smiley
 Pete
Logged
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!