Bachmann Forum

well after my mom made me tear up my HO layout in preperation to move she had bought me a N scale set (that i built from indiviual parts at a hobby store).

Less then a month later. Tongiht the engine, (a bachmann spectrum 8-40C) decided to die on me. a few year back, another regular line bachmann engine i had decided to die too. the origonal one died because the drive rods bent in the california heat and then when i gave it power it stripped the gears. THE engine made a buzzing sound which a local N scale club found and showed me the stripped gear.

I stepped out of N scale for a few years until now. 2 weeks ago we bought the set. and then tonight it started running sparadically. I had recently put grease on as a suggestion from a trainboard member to check and see if that was the problem. nope, still had grease and it moved easily. i cleaned the track and engine good and it ran fine.... until it suddenly very abbruptly stopped and started making this high pitched grinding sound, the exact same the other bachmann had when it stripped its gears. i poped the top and took it apart. i could find no stripped gears, after i put it back together it ran for about 5 minutes without making a sound. then the high pithced noise returned and this time the motor quit. as of right now the lights work but i cannot get it to move...
this is the second time a bachmann engine in N has failed me. Not very helping. I would love to get it fixed and running again , Any suggestion to check anything before i send it back to bachmann.