ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
October 19, 2018, 03:34:08 AM
Home Help Search Login Register
News: Please read the Forum Code of Conduct   >>Click Here <<
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  General Discussion
| | |-+  EZ Track
« previous next »
Pages: [1] Print
Author Topic: EZ Track  (Read 792 times)
Whiterg

View Profile
« on: November 01, 2017, 10:51:50 AM »

Does Bachmann have any intention of manufacturing either a 22" or 26" Radius Curve rerailer with wire track similar to the 18" track #44502 it already has?
Logged
Trainman203

View Profile
« Reply #1 on: November 01, 2017, 11:25:55 AM »

There are rail joiners with wire leads available while you wait.
Logged

Modeling the New Iberia and Northern 1945
Len

View Profile
« Reply #2 on: November 01, 2017, 12:20:36 PM »

There are rail joiners with wire leads available while you wait.

Good luck trying to get the factory joiners off the use them!

Len
Logged

If at first you don't succeed, throw it in the spare parts box.
jbrock27

View Profile
« Reply #3 on: January 05, 2018, 08:20:38 AM »

  Getting the factory joiners off is quite simple.

Nope, not always.  For anyone interested in facts, it would behoove them to check out the multitude of posts about this very subject on this very Board (but then again most never bother b4 asking a question, cause they might actually see it has been addressed 3 or 4 times, already.....)
Logged

Keep Calm and Carry On
Len

View Profile
« Reply #4 on: January 05, 2018, 10:43:29 AM »

...and the plug from your Bachmann controller (or a replacement plug from the parts store if you don't want to mess with your old plug)

If you use a replacement plug, unlike stereo connections that use the tip and ring, the wires for the controller plug go to the ring and sleeve (ground) contacts. Nothing goes to the tip connector. This is to prevent shorts when plugging into the controller.

Len
Logged

If at first you don't succeed, throw it in the spare parts box.
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!