I have some kato manual switches, and I am having trouble with a Bachmann Shay stalling on the switches.There are 2 ways you can set the switch, power and none power. It says to use non power routing for dcc, Powered routing can cause a short if the closed line of the rail touches the open line. If I tried the closed line would that help the stalling, or is there another way to stop the stalling with the Kato switch. Thanks foe any help. Wally
• Check the gauge of all wheels with a HO NMRA Mark IV Standards Gage.
• Place each screw to select Frog Power ON and Non-Power Routing.
• Check the wiring â€" you need power feeds on all rails before and after the turnout.