ill see if i can find one.

and ill look into the atlas switch but for now the switch i got will work until i get some more money.

im going to get rid of some old copper tomm so ill have some money then

thanks for the info

ok so i bought a center off switch to replace the old control box and got it all working

Warning!! BE CAREFUL THE WAY YOU CONNECT YOUR WIRES TO THE SWITCH DONT GET ANY SHORTTS (yes i know i spelled short wrong) Have Fun!!


radio shack cat. number for switch
275-709

oh ok i thought they had a UK website then yes they should be able to ship over their  search for what you want in the order parts area and then when it askes to estimate shipping enter ehat ever you need to and that should be just about it.

hope you find what you need

eye brow!!!!

ya thats true i forgot about that of course i didnt get any trains for this Christmas so i dont have to worry about that

i have no idea you can call service and i'm sure they would be-willing to help you out no problem just explain to them why you are calling.

did you put it on a hard surface like a piece of plywood under the snow then the train on top? Is your rug a high pile rug or a low pile rug? all of these can be factors of why this is happening.

let us know thank you

i dont know. can you do this? flip the train over and their are 4 to six screws on the bottom of the loco look at the paper that came with the set "the exploded view of the train" open it up. do you see anything black near the motor? let us know

Quotehttp://www.acehardware.com/product/index.jsp?productId=1290116&cp=2568443.2568450.2628076.2629124

just the active link

sorry about that it was chat speak UR means your

oh i just remember you saying something about Saskatchewan

i thought he mispelled it show how much i know.

right?

i don't use steam locos but my guess is that the smoke stack wasn't pitched so the breath down the pipe just move the oil down to where it was needed in stead of just sitting above it

go to the UK website this is the US website if you order from here you will pay through your ears but if you want to come back and chat with us once you order something feel free.


look forward to chatting with you!!

THANK YOU!!!!!

LOOK UP UR SPELLING OF JIM'S HOME TOWN YOU MISSPELLED IT

OK i found some info in an other post but i need some more info on it and thread is closed so I'm going to ask it in here. how many pieces of 18" rad curve do i need to add to the remote turnouts to make a 90^o turn off the divergence route?

thanks

MERRY CHRISTMAS