Been a long time since I've posted here, I do most of my posting now on my FB Page dedicated to my collection and projects.

BUT! I have a question, why soo much glue on these coaches? It was a pain in the thumb (literally as I sliced my thumb trying to cut the window glazing out) so I could repaint the coaches into the road I model.

Anywho here's how one of the two coaches look so far, I'm waiting on more decals.

Quote from: Terry Toenges on January 26, 2019, 09:46:46 PM
Were it not for the smoke coming from the stack, one would wonder if the Shay was even operable.

Looks like its being used as a boiler and not as a locomotive. But i'm hoping i'm wrong.

Quote from: Rick Abramson on August 04, 2018, 04:59:34 AM
According to Bachmann, the ACS-64 is as-is. It cannot be modified. What a disappointment!

Everything is modifiable with the right knowledge. If you have to run wires from the contacts to the motor and headlights (Which i do no recommend since the lights are LED and not adding risistors to the wires leading to the lights will blow them) or like I did with the EM1 just use exsisting wires and mount a DCC Ready board.

Quote from: Trackbump on August 05, 2018, 07:10:53 AM
Something wrong with it. Don't touch it voids warranty. Send it in to service . Should run like a Swiss watch DCC, DC what ever. 21st century motor control either dc, dcc is as good as it gets ,or should be if working correctly. No techs here just sales reps to smooth things over.

Adam

No I'm pretty sure its running just fine. The EM1 ran like a rocket right out of the box on DC. It was all or nothing. DCC & Sound & DCC & Sound Ready take up much more power then just plain DCC Onboard and I would really not run DCC and Sound on DC.

One thing to add, if the headlights are on the board you remove you will loose the lights but in the era I model it wasn't regulation to have them on during the day.

I'm not sure about the ACS but the EM1 the board was labeled telling which wire is which. the DCC Ready board was also the same way.

If you can get a DCC Ready board out of the parts store I'd recommend doing that. I had same experiance with the B&O EM1 ran full speed or no speed. I removed the DCC onboard/sound ready board and placed a DCC ready board in its place. Ran soo much better on DC.

Quote from: jonathan on May 30, 2018, 06:56:26 AM
Nice job on the Russian.

I, too, was having some difficulty viewing the photos. Dunno why.  I could view them on my phone and iPad, but not my PCs.  Weird.

Regards,

Jonathan

Thanks Jon, its weird because I posed the post from my PC Odd.

Quote from: Trainman203 on May 30, 2018, 08:12:34 AM
The Spectrum Vanderbilt tenders are long discontinued but you can still get this from the parts department:

http://estore.bachmanntrains.com/index.php?main_page=product_info&cPath=68_155&products_id=9968

Might take a little detail work, removal of the toy drawbar, and its short size is best for small engines.  I have one and it looks great behind the Bach Man's consolidation.  It's a little too tall at the oil bunker for the mogul, where I really wanted to use it.

I really wish Bachmann would sell the tenders by themselves again.

I used the medium version of the tender behind the 2-10-0

Quote from: ebtnut on May 29, 2018, 08:52:25 AM
Photos are not coming through for me.

I see them fine. Maybe browser settings?

Thanks

Over the weekend I decided to swap my Russian Decapod to a Vanderbilt tender. Came out great. had to do some wiring as the engine ran in the wrong direction but I think she looks great with the tender.






What ya guys think?
Emily

The NYC Niagara is one molded peice (smokebox boiler cab)

B&O had some ex-Seaboard Airlines.

The walkway gap i wanted to fill in but didnt have the right styrene strips. The other part i missed.


And i have a few what if engines.

So I've had a NYC Niagara for a while, but I repainted it kinda half-butt attempt.

So here it was after its initial repaint



Really Ugly don'tcha think?

So I started repairing this tender






So I came up with the Niagara and the vanderbuilt tender I was repairing, some other modifications and some paint and......




There is lettering on the tender, sunglare from the window makes it hard to see,

Changes I did
Engine Work:
Added Classification Lights (To be replaced, just trying to justify S&H)
New Headlight
Changed to LED
Removed smoke unit
Shaved off NYC Number Plate detail on front of smokebox
New Headlight Location
New Bell
Working front coupler
Window Glazing
B&O Capital dome on Sheild.
Paintwork


Sooooo How did i do?
Emily

If its anything like the Blue/white box Niagra theres two screws under the cab, once those are out it takes some wiggling and it should come apart.

Umm where do I start....

Baltimore & Ohio
0-4-0 - 1
0-6-0 - 2
0-6-0T - 4
0-8-0 - 2
2-10-0 - 1
2-10-2 - 3
2-6-6-2 - 2
2-6-6-6 - 1
2-8-0 - 3
2-8-0C - 1
2-8-0 OT - 2
2-8-2 - 4
2-8-4 - 1
2-8-8-0 - 1
2-8-8-4 - 1
4-4-0 - 7
4-6-0 - 4
4-6-4 - 1
4-6-2 - 6
4-8-4 - 3
4-8-2 - 3
2 truck Climax - 1
3 Truck climax - 1
3 truck heisler - 1
F7A - 1
GP7 - 3
GP9 - 2
Shark Nose (A&B) - 2
FA2 (A&B) - 1
RDC1 - 1
RDC2 - 2
BL2 - 2
SW9 - 2
Doodlebug - 3
Peter Witt Street Car - 1
GP18 - 1
E8A - 2
E8B - 1
SD9 - 2
SD7 - 1
DD40 - 1
2-6-0 OT - 2
2-6-0C OT -1
2-8-8-2 - 1
4-4-0 OT - 4

Chesapeake & Ohio
2-8-2 - 1
0-8-0 - 1
2-10-2 - 1
2-6-0 OT - 1
2-6-6-6 - 2
2-8-4 - 2
4-6-0 - 1
4-8-2 - 2
GP7 - 2
4-4-2 - 1

RF&P
2-8-4 - 1

Maryland & Pennsylvania
2-8-0 - 1
4-4-0 - 3
4-6-0 - 2
Doodle Bug - 1

Strasburg
0-4-0 - 1
2-4-0 - 1 (I'm trying to get this thing working!!!)
2-6-0 - 1
4-4-0 - 1

Baltimore & Annapolis
GE 70 - 1

American Freedom Train
4-8-4 - 2 (1 GS4 1 T1)

Baldwin Locomotive Works
2-8-0 - 1

Western Maryland
BL2 - 1

Erie Mining Company
GE45 - 1
3 truck shay - 1
3 truck hesiler - 1
2 truck climax - 2
Winter Tyme Express
4-4-0 OT - 1

Philidelphia and Reading
4-4-0 OT - 1

Carolwood Express
4-4-0 OT - 1

Central Railroad of California
4-4-0 OT - 1

Pennsylvania
2-6-0 - 1

Southern
4-4-0 - 1
4-6-0 - 1

Virginia and Truckee
4-4-0 OT - 1

John Bull
Dewitt Clinton
Thomas the Tank Engine



I think thats all!
Emily

You got me wanting to get my two out and do some mods. I based mine off KK-2 7450. I might leave one like it is, and change the other around. eather way the number boards are coming off.