I thank every one for all the tips with regards to converting the Doodlebug to DCC.  What an amazing group of fellow modelers.   John

Tom,

Thanks for the tips.  Strange, one would think that Bachmann would put a note on the exploded parts page.

John

Rich,

Thanks for the heads up on suppliers and the possibility of a short in the DCC socket.

John

Thanks for the link on the TSU-750.  Now the search will be on for best price and availability.

Rich, thanks for the reply.  Let's hope I get lucky and have a plug and play solution.  John

I thank every one for such prompt replies.  And yes, I do have a supply of tooth picks.

To make things more interesting I plan to shorten the Doodlebug to 40 or so scale feet.  My layout has many 15" radius curves.

But first I will proceed with DCC conversion.

Thanks for your prompt reply.  Sounds like good news.  I am now learning how to take the body off.

I have 2 Doodle Bugs that I would like to convert to DCC.  Do you have any suggestions?

How can one install a 'sound bug' in the HO 0-6-0 Saddle tank loco with DCC on Board?
  Item #81812

Any guidence would be greatly appriciated.

John

I have recently purchased a pair of Bachman 45 ton switchers with DCC on board.  In studying the parts explosion page that comes with locos I see that the frame has a location to hold a speaker.

I would appreciate it if anyone could tell me what sound system would be compatible with the locomotive.

No sir.  My question at this post was about the auto reverser.  I know about the other unit and I have one.  It of course will not work on a "Y".

I agree with Jim.  I use DCC to run the locomotives, but I wire the turnouts (switch) the old fanshin way and place the buttons (switches) near the turnout location.  In cases where practical I use manual throws.

John

Is the Bachman auto reverser, part #44548 compatible with DCC?

Just an update:

I have written to many manufactures about auto reverse on a "Y".  Of all, only one has responded to my question(s).  The respondent is MRC.

MRC feels that the AD520 can do the job.  They even emailed me a wiring installation diagram.

I have since prepared my "Y" per their instructions and ordered the AD520.  I also asked MRC if the AD520 could be used as a auto reverse unit on a straight section of track.  The answere is the 520 is not a auto reverser.

After the 520 arrives I will install and report back.

To all who have responded to my question I thank you.

Wishing all a Great Christmas and a Healthy New Year.


John

Thank you for your responce.  I will check it out.