i was wondering can i use esu switchpilot on e-z track switches?

hey i have question, is the gp40 with dcc sound under frame the same as gp40 regular that come with train set?

i have some McKinley passenger cars and there really nice but little tough to pull. has anyone replace the wheels to make it run free?

bachmann i have question? will you be making another round of McKinley explorer and  Princess Denali Express train set in future?

hi
i have the bachmann Motorized Turntable and it came with spring loaded switch but the connection on the turntable for wire is little big how do you hook it up the switch?

hi I have question about Bachmann blinking light bridge can it work for dcc layouts I have dynamis system and so far it doesn't work. now it hasn't shorten out anything and trains run fine over bridge but light doesn't turn on. maybe I got bad bridge.

hi
question since my bachmann turntable dose not work well under dynamis controlle do I need that jumper if I remove the decoder. I want to use that gray switch that came with. I trying to fine the jumper that it came with when I got the turntable.

hey bachmann i have bought few of thouse starter train sets like the mckinley explorer and Princess Cruises Denali Express Set and i really enjoy them. have there been talks or ideas for rocky mountaineer starter set? that be cool to add to list.

hey bachamnn i was wondering i want to expand the wireless ir cable with my probox. now i see that it a 6 wire cable purple, green, orange, gray, black, and blue. now i read someone use alarm cable but i was looking at HDMI cable and seems it have same color wire in cable plus extra. could that work?

hi
OK so i finally got my dynamis probox up and running and i did what the manual says to set up both maintrack and service track. i set up service track by isolating rails from rest of the layout with insulating rail joiners on both rails.
then added separate power with terminal/rerailer track in that service track area. then i hook up wires to the dynamis command station output.
for main track i hook up wires to the dynamis probox output. now i put two locomotives on layout, one on main track and other on service track and when i program one engine on service track it program both engines to to same number. did i miss something? 

hi
i have thouse bachmann e-z #5 Turnout on my layout and they all work good. but when i look under there a wire that suppost to connect to the frog. i don't have manual for it anymore but just wondering what dose it do? 

hi
i was wondering can Tidmouth Sheds from thomas and friends be use for other layouts or e-z track turntable? or will other engines like sd4 and es44 etc... won't fit?

hi
ok i just installed sound decoder (sdh164d) in athearns sd70ace. and in manual it come with default steam sound and sd38-2 sound. i trying to figer out how to change sound with my dynamis controle.

hi
i have question has anyone bought 36-509 E-Z Command Dynamis Wireless Receiver if so how long is the extension cord?
 

hi
ok so i got ez command dynamis controller for christmas and i got to say i really like it. question has anyone have both dynamis and ez track turntable hook up. if so what do you have it program under? that if you have turntable dcc like i have.

hey bachmann i saw this video on kato working crossings gates and i think it disconntinued. but it neat cause it has justable sensers in set of tracks, and you can add as many track crossings as you like rather it 2 or 5 tracks cause it was clip together kinda thing. and the gates go up and down and real flashing lights. so i was thiknig could you do the same thing but useing e-z track dual crossing gates with working signals and lights and ajustable sensers in ez track. or would that be copying kato idea and getting sued? 

hi
ok i went to trainshow earlyer this year and there this signal layout where one engine was on siding and signal was red and it was waiting for other engine to pass. so once the other engine pass and signal on siding turn green the that engien went on main line. and stop then back out on main line to other end where it stop at red liek to wait for other engien ot take siding. and once that engine same back and taking siding the mainline engine went on. and it did that back and forth and it was demo. now all if this was control by laptop witch i found really neat. but since technology come so far can you set a layout with signal that stop one train and wait for other train to go by. even if it at  max speed train not move until it get go ahead.

hi
OK so i upgrading my ez command controller to Dynamis System and doing research and stuff it seem really really neat. now i i also saw e-z command dynamis point accessory decoder and saw video of it being use on switches and stuff. now my layout is pretty big and have few ez track manual switches. 2 are hook up to a/c power pack with green extension switch wire at one end of table. so i was wondering will this work if i hook the green wire to switch buttion that come with switch and i take that red switch wire with prongs and hook it up to the e-z command dynamis point accessory decoder device would that work. or do you need that a/c power to make it work. now i could by dcc power switches but that would cost alot and i fix all my switches to make it not derail rail cars so.     

hey bachmann
i was wondering do you still sell the cp and cn sliver ligthing trainset? if not is there thoughts about bringing it back?

could i use red wires that come with ez track reversing loop pack to suppy power from one ez track terminal/rerailer to another ez track terminal/rerailer to spead even power on big layout?