News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

DCC trains and turnouts

Started by deny, February 28, 2010, 09:25:10 PM

Previous topic - Next topic

deny

 Is there any reason why I can not use DCC to run the locomotives , but use the ac side of the old dc controller to operate the turn outs?
  Was going all DCC ,but with a half dozen turnouts,it just seems like too much for one controller.
  These are the  wired turnouts!

ABC

If you have standard turnouts you can use the AC from the accessory output on your old controller. But DCC turnouts can only be powered by a DCC system or you can do them manually, but you cannot use standard alternating current (AC) or DC for that matter.

full maxx

#2
I have 2 crossovers 2 #5 and 2 #6 switches and use the old controller to work em with no prob...my switches are not dcc
look up FullMaxx1 on youtube or check the blog for the lastest updates  www.crumbsinmycouch.com